415F2 Backhoe Loader

415F2 Backhoe Loader

Experience the new Cat 415F2 Backhoe Loader with features including spacious operator station, optional pilot controls, superior durability and outstanding performance. Safely operate on the job site with quieter hydraulics, increased visibility, and the ability to have four wheel braking engaged without wearing on tires or drive train.

Engine
Net Power - SAE J1349
68HP
Bore
3.9in
Stroke
4.33in
Displacement
207in³
Rated Net Power - 2,200 rpm - ISO 9249
68HP
Net Peak Power - 1,800 rpm - EEC 80/1269
73HP
Gross Power - ISO 14396
74HP
Net Power - 2,200 rpm - SAE J1349
68HP
Engine Model
Cat® C3.4B
Net Peak Power - 1,800 rpm - SAE J1349
72HP
Gross Power - SAE J1995
74HP
Net Peak Power - 1,800 rpm - ISO 9249
73HP
Net Torque Rise - 1,400 rpm - SAE J1349
88%
Rated Net Power - 2,200 rpm - EEC 80/1269
69HP
Rated Net Power - ISO 9249
68HP
Rated Net Power - SAE J1349
68HP
Net Peak Torque - 1,400 rpm
307ft-lb
Note
Engine meets U.S. EPA Tier 4 Final emission standards.
Backhoe
Dig Depth - Standard
14.3ft
Dig Depth - E-Stick Extended
17.9ft
Weights
Operating Weight - Maximum
24251lb
Cab - ROPS/FOPS
359lb
Four Wheel Drive
392lb
Counterweights - Option 1
255lb
Air Conditioning
101lb
Counterweights - Option 2
530lb
Counterweights - Option 3
1015lb
Operating Weight - Maximum - ROPS Capacity
24251lb
MP Bucket (0.96 m3/1.25 yd3) - No Forks or Teeth
1642lb
Extendible Stick
659lb
Hydraulic System
Pump Type
Variable Flow, Axial Piston
Type
Closed Center
Pump Capacity at 2,200 rpm
35gal/min
System Pressure - Loader
3336psi
System Pressure - Backhoe
3336psi
Engine Features
Feature (13)
Standard glow plug starting aid system for efficient cold weather starting.
Feature (2)
Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
Feature (10)
Direct injection fuel system provides accurate fuel delivery and efficiency.
Feature (14)
High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
Feature (11)
Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
Feature (8)
Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
Feature (3)
Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
Feature (15)
Higher low end torque for better engine/machine performance.
Feature (5)
For durability, inlet valves are nitrided, martensitic chrome silicon steel.
Feature (7)
Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
Feature (16)
Engine is equipped with electric fuel priming pump.
Feature (9)
Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
Feature (12)
Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
Feature (1)
Regeneration is passive and does not require any input from the operator or disrupt work.
Feature (4)
Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
Feature (6)
For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
Tires
Choice 2
Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
Choice 7
Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8
Choice 3
Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
Choice 4
Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH
Choice 6
Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU
Choice 5
Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4
Choice 1
Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
Standards
Cab - Sound
ANSI/SAE J1166 OCT98 is 79 dB(A)
Cab - ROPS
SAE J1040 MAY94; ISO 3741 1994
Cab - FOPS
SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
Brakes
SAE J/ISO 3450; ISO 3450 1996
Exterior Sound
SAE J188 JUN86 is 76 dB(A)
Steering
Axle Oscillation
11°
Bore
2.6in
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket
36ft
Rod Diameter
1.4in
Stroke
4.7in
Type
Front Wheel
Power Steering
Hydrostatic
Turning Circle - (inner wheel not braked) - Outside Front Wheels
26.8ft
Brakes
Feature (1)
Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
Feature (4)
Parking/secondary brakes are independent of the service brake system.
Feature (3)
Foot operated brake pedals can be interlocked for roading.
Feature (5)
Parking brake is mechanically applied through an adjustable hand lever located on the right console.
Feature (2)
Self-adjusting, completely enclosed and sealed.
Service Refill Capacities
Note
Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
Engine Oil - With Filter
2.3gal (US)
Transmission - Power Shuttle - 4WD
4gal (US)
Rear Axle
4.4gal (US)
Front Axle (4WD)
2.9gal (US)
Transmission - Power Shuttle - 2WD
4gal (US)
Front Axle (4WD) - Planetaries
0.2gal (US)
Cooling System with Air Conditioning
5.8gal (US)
Rear Axle - Planetaries
0.4gal (US)
Fuel Tank
42gal (US)
Hydraulic System
23.8gal (US)
Hydraulic Tank
10.6gal (US)
Transmission
Power Shuttle Transmission - Forward 1st
3.4mile/h
Power Shuttle Transmission - Reverse 4th
23mile/h
Power Shuttle Transmission - Reverse 3rd
12mile/h
Power Shuttle Transmission - Reverse 1st
3.4mile/h
Power Shuttle Transmission - Forward 4th
23mile/h
Power Shuttle Transmission - Forward 3rd
12mile/h
Power Shuttle Transmission - Forward 2nd
5.5mile/h
Power Shuttle Transmission - Reverse 2nd
5.5mile/h
Axle Ratings
Front Axle (2WD) - Static
50582lb
Front Axle (4WD) - Dynamic
20233lb
Front Axle (2WD) - Dynamic
20233lb
Front Axle (4WD) - Static
50582lb
Rear Axle - Static
50582lb
Rear Axle - Dynamic
20233lb

Standard Equipment:

Air cleaner Alarm, back-up Alternator, 150 amp Audible system fault alarm Backhoe controls, mechanical two lever Battery, maintenance-free, 880 CCA Battery disconnect switch Battery remote jumpstart Boom transport lock Brace, lift cylinder Brake, secondary parking Brakes, hydraulically boosted, oil disc, dual pedals, interlocking Bucket level indicator Canopy, ROPS/FOPS Coat restraint Coolant/antifreeze, extended life Counterweight, bumper Dome light (cab only) Diagnostic port for engine Differential lock, loader joystick Drink holders, two Engine, Cat C3.4B, meets U.S. EPA Tier 4 Final emission standards, diesel particulate filter Engine enclosure, sound suppression removal panels Face seals, O-ring Fan, suction and guard Fast reversing shuttle, all gears Fenders, rear Filters, spin-on: fuel, engine oil, transmission oil, water separator Filters, bowl and cartridge: hydraulic fluid Flashing hazards/signal lights Floor mat Fuel tank, fully enclosed Fully hinged front grill for cooling package cleaning access Gauge cluster: coolant temperature, fuel level, torque converter temperature, battery voltage Ground level fuel fill High ambient cooling package Hood lock, inside cab Hydraulic hose, XT Hydraulic oil cooler Hydraulic oil level sight gauge Hydraulic valve, hydrostatic steering Hydraulic valves, loader 2 function Hydraulic valves, backhoe 4 function Hydraulics, load sensing with variable displacement piston pump Indicator lights: wait to start, water in fuel, engine warning, warning lamp, object handling stability warning, manual regeneration required, low engine oil pressure; LCD warnings: machine locked (if equipped), service due, air filter blocked, auto idle shutdown, high coolant temperature, high torque converter temperature, high exhaust temperature, engine oil life indicator Instrument panel lights Key start/stop system LCD screen: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, oil life reset, DPF force regeneration, maintenance intervals, ECM/system info Lights, working (2 front, 2 rear) Loader, self-leveling, return-to-dig and transmission disconnect switch Loader, single tilt Mirror, rearview Open circuit breather Power receptacle, 12 volt, 2 internal, 1 external Power steering, hydrostatic Seat belt, retractable, 51 mm (2 in) Stabilizer shoes, street Steering knob Seat, air suspension, fabric or vinyl cover, with armrest Socket, two roof Starting system, glow plugs Steering, hydrostatic Storage compartment, lockable Storage tray Stop and tail lights Swing transport lock Tires Toolbox, external, lockable Torque converter Throttle, hand and foot, electronic Transmission, four speed, syncromesh Transmission neutralizer switch Transport tie-downs Two Wheel Drive Vandalism locks, three Warning horn, electric

Optional Equipment:

Backhoe controls, pilot joysticks Battery, additional, 880 CCA Cab, standard Cold weather fuel (–30° C/–22° F) Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb) Fenders, front with integral steps Four Wheel Drive/Brake Mode Selector Guard, boom protection plate Guard, stabilizer, rock Hydraulic valves, loader (3rd valve for GP, MP or Quick Coupler) Hydraulic valves, backhoe (5th and 6th function) Hydraulic lines, combined function auxiliary Product Link, satellite, PL631E Product Link, cellular, PL641I Quick Coupler, hydraulic, dual lock Quick Coupler, manual, dual lock Quick Coupler, pin lock Radio and CD player Radio and CD player, Bluetooth Ride Control Rotating beacon, magnetic mount Seat belt, 75 mm (3 in) Security system keypad Stabilizer pads, grouser type Stabilizer pads, reversible Stick, extendible Storage box Vandalism protection, gauge cover Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product