MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration

MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration

Specifications
Bit Load
Up to 42 149 kg (Up to 92,922 lb)
Hole Diameter
203-311 mm (8-12.25 in)
Engine
C32® @ 1,800 rpm
Operator Environment
Components (1)
Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station
Components (13)
Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Components (9)
Power convertor 24V to 12V
Components (2)
Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave
HVAC
– Floor vents in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, does not require roof access, and has approximately 500 hour service interval
– Defogging HVAC vents on driller window
Components (6)
Two swing-out hinged doors with windows and Cat keyed locks
Components (14)
Trainer’s seat that folds away and has retractable seat belt (optional)
Cameras
– Mounted on the front and left sides to provide 360° view from operator's seat
– Camera on the mast to view pipe carousel/top drive operation
Components (5)
Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
Components (10)
Radio-ready for communication and entertainment radio
Cab - Premium
– Leather seat with heat and ventilation
– Dual pane window glass
– Front window guard
– Additional in-cab storage box
– Additional windshield wipers on front and rear windows
– Window shades (option)
– Foldaway trainer’s seat (option)
Components (11)
Cab roof access ladder (option)
Cab - Standard
– Fabric seat
– Single pane window glass
– Windshield wiper for driller window
– Window shades (option)
– Foldaway trainer’s seat (option)
– Removable floor mat
Components (8)
Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
Components (12)
Literature holder
Lighting
– LED interior lights; separate reading light, and backlit joysticks and keypads
– Zone controls for area lights and spot lighting for night drilling
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast caro
Components (7)
Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port
Components (4)
Drill performance touchscreen display
Components (3)
Cab perimeter walkway available for both cab sizes
Dimensions (Approximate) - 13.7 m (44.9 ft) Mast
Height - Mast Up
65.39ft
Width - Front
17.68ft
Body Length - Standard Cab
43.54ft
Body Length - Extended Cab
42.24ft
Width - Rear
20.74ft
Length - Mast Down - Standard Cab
69.23ft
Length - Mast Down - Extended Cab
70.87ft
Cooling
Components (3)
Replaceable cooler core sections
Components (4)
Automatic variable speed fan control
Features
Functional in ambient temperature of 52° C (125° F)
Components (2)
Separate engine cooling module
Components (1)
Coolers with easy cleaning access
Undercarriage
Lower rollers
Thirteen (13)
Model
Cat® 349E EL Excavator type
Carrier Rollers
Three (3)
Triple grousers for hard rock ground bearing pressure 1.59 bar (23.1 psi)
23.6in
Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi)
29.5in
Drawbar Pull
122971lbf
Track chain guards and guides
Level two
Travel Speed
1.5mile/h
Dimensions (Approximate) - 17.5 m (57.4 ft) Mast
Height - Mast Up
77.99ft
Width - Rear
20.73ft
Body Length - Standard Cab
43.54ft
Length - Mast Down - Extended Cab
83.33ft
Length - Mast Down - Standard Cab
81.69ft
Width - Front
17.68ft
Body Length - Extended Cab
42.24ft
Frame and Work Deck
Components (1)
Stationary rear deck; for vertical and angle drilling
Components (2)
Four leveling jacks to provide leveling on a 7° bench (any orientation)
Features (6)
Three egress points on deck areas in addition to main access
Components (10)
Drill pipe thread greaser with remote fill tank or disposable grease bucket (option)
Features (7)
Sturdy guardrails, toe guards, self closing gates
Components (4)
Heavy duty tow hooks (front end)
Components (3)
Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option)
Components (8)
DTH hammer storage on drill deck with high pressure configuration (option)
Features (4)
Fuel capacity expansion for additional +1609 L (425 gal)
Features (5)
Bolt-on platform for cold weather generator or fire suppression bottles (option)
Components (9)
Hydraulically operated viewing hatch in drill deck with spotlight (option)
Features (1)
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Components (5)
Four (4) lift lugs, for use with cables or chains
Components (7)
Bit storage box in-deck with hinged cover (option)
Components (6)
Walkway around cab to drill deck (option)
Features (2)
Slip resistant surface
Features (3)
Fuel tank capacity 1609 L (425 gal)
Automation and Technology
Type
Autonomy ready
Components (2)
Auto level, auto retract, auto mast
Components (1)
Drill depth indicator and interlocks
Optional Cat Terrain for Drills - Mining System Interface
– Production
– Navigation
Components (4)
Product Link Elite (hardware from factory, subscription package via dealer)
Components (6)
Wiring for third party interface
Components (3)
Drill assist (single or multipass auto drill) (options)
Components (5)
Optional Command for Drilling enables each operator to manage more than one machine
Basic Specs
Compressor - Rotary Drilling (1)
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
Compressor - Rotary Drilling (2)
73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
13.7 m (44.9 ft) Mast - Pulldown Capacity
Up to 39 009 kg (Up to 86,000 lb)
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth
44.9ft
Emissions (U.S. EPA Tier 4 Final): Engine
C32 @ 1,800 rpm
Compressor - DTH Drilling
42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
17.5 m (57.4 ft) Mast - Hoist Capacity
Up to 29 484 kg (Up to 65,000 lb)
13.7 m (44.9 ft) Mast - Bit Load - Single Pass
Up to 41 165 kg (Up to 90,753 lb)
Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396
1007HP
Emissions (Equivalent to Tier 2): Power Rating ISO 14396
1031HP
13.7 m (44.9 ft) Mast - Hoist Speed
122.7ft/min
17.5 m (57.4 ft) Mast - Hoist Speed
122.7ft/min
Emissions (Equivalent to Tier 2): Engine
C32 @ 1,800 rpm
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth
Down to 74.6 m (Down to 244.9 ft)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth
Down to 47.9 m (Down to 157.4 ft)
17.5 m (57.4 ft) Mast - Pulldown Capacity
Up to 39 009 kg (Up to 86,000 lb)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth
57.4ft
13.7 m (44.9 ft) Mast - Hole Diameter Range
203-311 mm (8-12.25 in)
Angle Drilling
Vertical to 30° (in 5° increments)
17.5 m (57.4 ft) Mast - Hole Diameter Range
203-311 mm (8-12.25 in)
17.5 m (57.4 ft) Mast - Bit Load - Single Pass
Up to 42 149 kg (Up to 92,922 lb)
13.7 m (44.9 ft) Mast - Hoist Capacity
Up to 29 484 kg (Up to 65,000 lb)
Operating System Controls - Standard
Components (20)
Cabin pressure manometer with indicator (option)
Components (3)
Rotation torque control
Components (12)
Dust suppression control
Components (17)
Tram interlock, mast up and locked or down and parked
Components (1)
All electric controls for drilling, tramming, leveling plus auxiliary functions
Components (22)
Prewired for Terrain and autonomous operation
Components (8)
Delayed engine shut down
Components (19)
Cab environment controls (AC, filter, heat, fan speeds)
Components (7)
Drill performance and display system
Components (13)
Mast lock indicator
Components (6)
Drill depth meter
Components (2)
Electronic compressor control
Components (4)
Virtual rotary head travel stops and interlocks
Components (11)
Jack pressure sensors in the display
Components (5)
Pipe positioner engaged/disengaged indicator
Components (18)
Tram interlock, jacks retracted
Components (16)
Tram interlock, pipe in hole
Components (21)
Dust curtain lifting system – auto hydraulic raise front and rear (option)
Components (15)
Tram interlock, machine stability limits
Components (9)
Rotary head rpm gauge – (digital display in screen)
Components (10)
Filter indicators for hydraulic, compressor and engine
Components (14)
ECM controlled proportional fan speed control system
Components (23)
Data logging of machine health with warnings, and fault code records; export capability
Compressor/Receiver Choices
Rotary Drilling (1)
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
DTH Drilling - Includes Tool Lubrication and Hammer Storage
42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
Note
With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption
– Both high and low pressure compressors contain this feature
Receiver Tank Choice (2)
High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE
Choice
Electronic compressor control and regulation with purged air lines
Rotary Drilling (2)
73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
Receiver Tank Choice (1)
Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE
Engine Choices
Components (2)
Scheduled oil sampling (S∙O∙SSM) ports
Components (1)
Dual starter motors
Components (3)
Common air intake filters provide +500 hour service interval in normal operating conditions
Components (4)
Ether starting aid; ether bottle supplied locally
Hydraulics
Components (2)
One (1) auxiliary circuit pump – 110 cc (piston, load sensing)
Components (3)
Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls)
Components (1)
Two (2) primary pumps – 210 cc (piston, with proportional electronic controls)
Components (4)
Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)
Components (5)
Scheduled Oil Sampling (S∙O∙S) ports
Tool Package DTH
Components (1)
Two piece bushing
Components (6)
Pipe wiper seal
Components (4)
Shock sub and top sub adapter
Components (5)
Cross over hammer adapter
Components (3)
Deck wrench, sliding
Components (2)
Pipe positioner inserts
Drill Pipe
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary or DTH
7.625in
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (2)
8.625in
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary
9.25in
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (2)
8.625in
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (1)
8in
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: DTH
7in
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary or DTH
7.625in
Note
Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
  • Dual purpos
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (1)
8in
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: DTH
7in
Overhead Winch System (optional)
Note
Variable speed control
Cable Diameter
0.5in
Winch Reach - Past The Drill Deck
20ft
Capacity Rating
4000lb
Rotary Head Top Drive System
Components (3)
Rotary torque control
Components (2)
Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque
Components (1)
Spindle with 168 mm (6.625 in) API regular thread and splined collar
Components (4)
Virtual rotary head travel stops and interlocks
Dust Suppression Choices
Water Injection - Standard
– Water tank capacity 1514 L (400 gal)
Choices (1)
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)
Choices (3)
Static dust curtains, four sides boxed in (standard)
High Volume Water Injection System - Not Compatible with Basic Service Package
– Water tanks total capacity 3785 L (1,000 gal) maximum
– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)
– Secondary tank above deck – 2271 L (600 gal) capacity deck
Choices (2)
Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications)
Water injection and dry dust collector (option)
– Water tank capacity 1514 L (400 gal)
– 204 m³/min (7,200 cfm) dry dust collector
– Self-cleaning filters, with auto-eject dust chute
Frame Access Choices
Choice (1)
Fixed access ladder to the cab area
Choice (3)
Cab perimeter walkway available with either choice
Choice (2)
Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down
Tool Package Rotary
Components (2)
Pipe positioner inserts
Components (4)
Top Sub, or Shock sub and cross over adapter (option)
Components (3)
Deck wrench, sliding
Components (5)
Bit sub
Components (1)
Roller deck bushing
Components (6)
Pipe wiper seal
Safety and Security
Feature
Approach angle of 14 degrees facilitates loading and unloading on a lowboy
Components (7)
Mast access ladder with mast grating (option)
Components (4)
Tram alarm is automatic and audible
Components (11)
Ground level keyed battery disconnect/starter lockout with remote jump start terminals
Components (1)
Alloy drill deck covers, with storage provision
Components (5)
Hinged protective guard for full front drill window
Components (3)
Electric horn activated by push button in the cab
Components (8)
Three egress points on deck areas in addition to main access
Components (10)
In-deck mounted battery box
Components (9)
Self-closing, gates secure egress ladder locations
Components (12)
Air hose retention devices
Components (2)
Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left
Components (6)
Guards for exhaust pipes and turbo lines
Mast Packages
Mast Accessories Hydraulic (2)
One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket
Mast Accessories Hydraulic (1)
One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket
Angle Drilling
Included with either mast
Mast Accessories Manual, 17.5 m (57.4 ft) Mast
Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket
Mast Accessories Manual, 13.7 m (44.9 ft) Mast
One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket
Carousel (Mast size and pipe diameter dependent)
13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (204.9 ft): Pipe diameters
178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth 74.6 m (244.9 ft): Pipe diameters
194 mm (7.625 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameter
9.25in
17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters
178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
Note
13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
  • Accepts 194 mm (
Service Tool Options
Option
Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter
Lifting Bails (Available on Request)
– 114 mm (4.5 in) API reg thread
– 140 mm (5.5 in) API reg thread
– 168 mm (6.625 in) for top sub/shock sub API thread
– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO
Climate Choices
Climate Level 1 Standard Fluids and Lubricants (2)
Withstands high heat to 52° C (125° F)
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6)
Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3)
Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1)
Rated down to –40° C (–40° F) temperatures
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5)
Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2)
Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4)
Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plu
Climate Level 2 Arctic Fluids and Lubricants
Rated down to –18° C (–0.4° F) temperatures
Climate Level 1 Standard Fluids and Lubricants (1)
Rated down to –1° C (30° F) temperatures
Mast
Features (6)
Sliding deck wrench assembly
Features (11)
Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb)
Features (15)
Mast access ladder and grating (option)
Features (5)
Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters
Features (7)
Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Features (14)
Mast lanyard mounting provisions (option)
Features (8)
Angle drilling 0-30°; in 5° increments
Note (2)
Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling
Features (12)
Pipe catcher; manual or optional hydraulically actuated
Features (4)
Feed system accommodates multiple pipe diameters
Note (1)
Hydraulic, indexing pipe carousels accept various pipe diameters
Features (13)
Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only)
Features (2)
Pulldown/hoist system is a single cylinder
Features (1)
13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel
Features (9)
Drill pipe positioner
Features (10)
Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option)
Features (3)
Auto tensioning of pull down and hoist cables
Weights - 13.7 m (44.9 ft) Mast
Working Weight Range - Minimum/Maximum
75 800/97 000 kg (167,110/213,848 lb)
Hydraulic Break Out Wrench
Variable Grip Hydraulic Break Out Wrench Grip Ranges (2)
235 mm (9.25 in)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (1)
178-219 mm (7.0-8.625 in)
Service Packages
Package (3)
Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose
Package (1)
Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water
Package (2)
Standard – Fast Fill for fuel and water; Automatic Lubrication System
Weights - 17.5 m (57.4 ft) Mast
Working Weight Range - Minimum/Maximum
75 500/97 500 kg (166,449/214,950 lb)

Standard Equipment:

Optional Equipment:

Frame
  • Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (option) required for autonomy packages
 
Mast
  • Overhead winch with remote; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
  • Rotary tool lubrication, 113.5 L (30 gal) oil injection system
  • Mast access ladder, mast grating and lanyard posts
 
Operator Environment
  • Trainer seat that folds away
  • Window shades
  • Cabin pressure manometer gauge
  • Cab roof access ladder
 
Service Tool Options
  • Bushing Retention Tool 178 to 235 mm (7 to 9.250 in) pipe diameter
  • Lifting bails (available on request; required for commissioning)
    – 114 mm (4.5 in) API reg thread
    – 140 mm (5.5 in) API reg thread
    – 168 mm (6.625 in) for top sub/shock sub API reg thread
    – 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
    – 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
 
Technology Products
  • Product Link Elite – cellular
  • Product Link Elite – satellite
  • Product Link Elite – Dual (cellular and satellite)
  • Terrain for Drilling
 
Ground Engaging Tools
  • Drill bits, rotary tricone
    – 228 mm (9.0 in), OPT 1, (S3)
    – 228 mm (9.0 in), OPT 2, (M2)
    – 228 mm (9.0 in), OPT 3, (H1)
    – 251 mm (9.875 in), OPT 1, (M1)
    – 251 mm (9.875 in), OPT 2, (M3)
    – 251 mm (9.875 in), OPT 3, (H1)
    – 270 mm (10.625 in), OPT 1, (S3)
    – 270 mm (10.625 in), OPT 2, (M3)
    – 270 mm (10.625 in), OPT 3, (H1)
    – 311 mm (12.25 in), OPT 1, (M1)
    – 311 mm (12.25 in), OPT 2, (M3)
    – 311 mm (12.25 in), OPT 3, (H1)
 
Dust Suppression
  • Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
  • Tram off spray system
 
Drill Pipe
  • 12.19 m (40 ft) Pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of four
    – DTH – 178 mm (7 in)
    – Rotary/DTH – 194 mm (7.625 in)
    – Rotary – 203 mm (8 in)
    – Rotary – 219 mm (8.625 in)
  • 7.62 m (25 ft) Pipes, 17.5 m (57.4 ft) Mast – Carousel holds quantity of four
    – DTH – 178 mm (7 in)
    – Rotary/DTH – 194 mm (7.625 in)
    – Rotary – 203 mm (8 in)
    – Rotary – 219 mm (8.625 in)
    – Rotary – 235 mm (9.25 in) Carousel accepts quantity of two
  • 9.14 m (30 ft) pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of two with special sub adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
    – Accepts 194 mm (7.625 in) pipe
  • Contact factory for additional pipe diameters
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product