Product Description
Producing reliable power from 1650 to 2000 ekW at 60 Hz, our 3606 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We’ve designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is certified for low fuel consumption.
Generator Set Specifications
- Maximum Rating
- 2000 ekW
- Minimum Rating
- 1650 ekW
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Frequency
- 60 Hz
- Speed
- 900 rpm
- Duty Cycle
- Standby, Prime, Continuous
Engine Specifications
- Engine Model
- 3606 I-6,4-Stroke Water-Cooled Diesel
- Bore
- 11in
- Stroke
- 11.8in
- Displacement
- 111in³
- Compression Ratio
- 13:01
- Aspiration
- TA
- Fuel System
- Direct unit injection
- Governor Type
- Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum
- 404in
- Width - Maximum
- 99.62in
- Height - Maximum
- 156.6in
- Dry Weight - Genset (maximum)
- 74970lb
Standard Equipment
-
- Air Inlet System
-
- Breather, crankcase, top-mounted
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Air inlet shutoff
-
- Cooling System
-
- Jacket water thermostats
- Engine coolant water drains
- Water temperature regulator
-
- Exhaust System
-
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
- Dry, gas tight, exhaust manifold
-
- Fuel System
-
- Simplex or duplex
-
- Generator System
-
- Custom generator per generator data sheet completed by dealer
-
- Governor System
-
- UG Actuator
-
- Lube System
-
- Centrifugal oil filters with single shutoff
- Oil pressure regulating valve
- Service side engine mounted on cylinder block inspection covers
- Oil filler and dipstick
- Crankcase explosion relief valves
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
-
- Mounting System
-
- Damper, torsional vibration
- Engine and generator mounting
-
- Starting / Charging System
-
- Vane type air starter
- One motor, engine mounted at rear, on left side
- Air silencer
- Line group for single point custom connection
-
- General:
-
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
Optional Equipment
-
- Air Inlet System
-
- Air inlet adapter
- Air cleaner
- Vertical support bracket
- Heavy duty air cleaner
- Boost control valve
- Air cleaner louver assembly
- Soot filter
-
- Cooling System
-
- Heating aids
- Cooling system aids
- Expansion tank
- Auxiliary water pump
-
- Exhaust System
-
- Weld flange and related hardware
- Flexible exhaust fittings
-
- Fuel System
-
- Duplex primary fuel strainer
- Fuel priming pump
- Fuel system connections
-
- Generator System
-
- Class F insulation
- 3 Phase, six Leads, WYE
- Busbar connections
- Anti-condensation space heaters
- Winding temperature detectors
-
- Governor System
-
- EGB actuator
- 723 Plus
- Electronic/actuators
- Battery backup/power supply
- Digital programmers
- 2301 A load share
-
- Lube System
-
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
-
- Mounting System
-
- Vertically restrained
- Isolator
- Spring type vibration isolators
- Non-vertically restrained
-
- Starting / Charging System
-
- Compressed air flex hose
- Pressure reducing valve
-
- General:
-
- Custom paint colors