3608 Generator Set (Medium Speed)

3608 Generator Set (Medium Speed)

3608 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability,reliability, and cost-effectiveness.

Generator Set Specifications
Minimum Rating
1830 ekW
Maximum Rating
2660 ekW
Emissions/Fuel Strategy
Low Fuel Consumption
Frequency
60 Hz
Speed
720 & 900 rpm
Duty Cycle
Standby, Prime, Continuous
Engine Specifications
Engine Model
3608 I-8,4-Stroke Water-Cooled Diesel
Bore
11in
Stroke
11.8in
Displacement
9064in³
Compression Ratio
13:01
Aspiration
TA
Fuel System
Direct unit injection
Governor Type
Generator Set Monitoring System (GMS)
Generator Set Dimensions
Length - Maximum
404in
Width - Maximum
99.62in
Height - Maximum
156.6in
Dry Weight - Genset (maximum)
91050lb

Standard Equipment:

Air Inlet System
  • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Air inlet shutoff
  • Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
  • Breather, crankcase, top-mounted
 
Cooling System
  • Engine coolant water drains
  • Water temperature regulator
  • Jacket water thermostats
 
Exhaust System
  • Includes adapter, Flexible exhaust fitting
  • 457 mm (18 in) Cat bolt pattern
  • Dry, gas tight, exhaust manifold
 
Fuel System
  • Simplex or Duplex
 
Generator System
  • Custom generator per generator data sheet completed by dealer
 
Governor System
  • UG Actuator
 
Lube System
  • Oil filler and dipstick
  • Service side engine mounted on cylinder block inspection covers
  • Wet oil sump. Includes engine-driven main lubrication & oil pumps, Oil Lines and Oil Pan
  • Centrifugal oil filters with single shutoff
  • Oil pressure regulating valve
  • Crankcase explosion relief valves
 
Mounting System
  • Engine and generator mounting
  • Damper, torsional vibration
 
Starting / Charging System
  • Air silencer
  • One motor, engine mounted at rear, on left side
  • Vane type air starter
  • Line group for single point custom connection
 
General:
  • Gear driven pumps: Fuel, Oil, Jacket water, Aftercooler / Oil cooler water
  • Paint, Caterpillar yellow
 

Optional Equipment:

Air Inlet System
  • Heavy duty air cleaner
  • Air inlet adapter
  • Boost control valve
  • Air cleaner louver assembly
  • Vertical support bracket
  • Soot filter
 
Cooling System
  • Auxiliary water pump
  • Heating aids
  • Cooling system aids
  • Expansion tank
 
Exhaust System
  • Weld flange and related hardware
  • Flexible exhaust fittings
 
Fuel System
  • Fuel priming pump
  • Duplex primary fuel strainer
  • Fuel system connections
 
Generator System
  • Class F insulation
  • Anti-condensation space heaters
  • 3 Phase, six Leads, WYE
  • Winding temperature detectors
  • Busbar connections
 
Governor System
  • Battery backup / Power supply
  • 2301 A load share
  • Electronic / actuators
  • Digital programmers
  • EGB actuator
  • 723 Plus
 
Lube System
  • Lube ANSI adapter (Emergency connection)
  • Oil pan drain valve
 
Mounting System
  • Spring type vibration isolator
  • Non-vertically restrained
  • Vertically restrained
  • Isolator
 
Starting / Charging System
  • Pressure reducing valve
  • Compressed air flex hose
 
General:
  • Custom paint colors
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product