3608 Generator Set (Medium Speed)

3608 Generator Set (Medium Speed)

3608 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability,reliability, and cost-effectiveness.

Generator Set Specifications
Maximum Rating
3575 kVA
Minimum Rating
2363 kVA
Emissions/Fuel Strategy
Low Fuel Consumption
Frequency
50 Hz
Speed
750 & 1000 rpm
Duty Cycle
Standby, Prime, Continuous
Engine Specifications
Engine Model
3608 I-8,4-Stroke Water-Cooled Diesel
Bore
11in
Stroke
11.8in
Displacement
9064in³
Compression Ratio
13:01
Aspiration
TA
Fuel System
Direct unit injection
Governor Type
Generator Set Monitoring System (GMS)
Generator Set Dimensions
Length - Maximum
404in
Width - Maximum
99.62in
Height - Maximum
156.6in
Dry Weight - Genset (maximum)
91050lb

Standard Equipment:

Air Inlet System
  • Breather, crankcase, top-mounted
  • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
  • Air inlet shutoff
 
Cooling System
  • Water temperature regulator
  • Jacket water thermostats
  • Engine coolant water drains
 
Exhaust System
  • 457 mm (18 in) Cat bolt pattern
  • Includes adapter, flexible exhaust fitting
  • Dry, gas tight, exhaust manifold
 
Fuel System
  • Simplex or duplex
 
Generator System
  • Custom generator per generator data sheet completed by dealer
 
Governor System
  • UG Actuator
 
Lube System
  • Service side engine mounted on cylinder block inspection covers
  • Centrifugal oil filters with single shutoff
  • Crankcase explosion relief valves
  • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
  • Oil filler and dipstick
  • Oil pressure regulating valve
 
Mounting System
  • Engine and generator mounting
  • Damper, torsional vibration
 
Starting / Charging System
  • Line group for single point custom connection
  • Air silencer
  • One motor, engine mounted at rear, on left side
  • Vane type air starter
 
General:
  • Paint, Caterpillar yellow
  • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
 

Optional Equipment:

Air Inlet System
  • Air cleaner louver assembly
  • Air inlet adapter
  • Heavy duty air cleaner
  • Vertical support bracket
  • Soot filter
  • Boost control valve
 
Cooling System
  • Expansion tank
  • Auxiliary water pump
  • Heating aids
  • Cooling system aids
 
Exhaust System
  • Flexible exhaust fittings
  • Weld flange and related hardware
 
Fuel System
  • Duplex primary fuel strainer
  • Fuel priming pump
  • Fuel system connections
 
Generator System
  • Winding temperature detectors
  • Anti-condensation space heaters
  • Busbar connections
  • 3 Phase, six Leads, WYE
  • Class F insulation
 
Governor System
  • Digital programmers
  • 2301 A load share
  • 723 Plus
  • EGB actuator
  • Electronic/actuators
  • Battery backup/power supply
 
Lube System
  • Oil pan drain valve
  • Lube ANSI adapter (Emergency connection)
 
Mounting System
  • Spring type vibration isolators
  • Non-vertically restrained
  • Vertically restrained
  • Isolator
 
Starting / Charging System
  • Pressure reducing valve
  • Compressed air flex hose
 
General:
  • Custom paint colors
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product