C280-8 Generator Set (Medium Speed)

C280-8 Generator Set (Medium Speed)

C280-8 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability,reliability, and cost-effectiveness.

Generator Set Specifications
Maximum Rating
2660 ekW
Minimum Rating
1830 ekW
Emissions/Fuel Strategy
IMO - Tier 2
Frequency
60 Hz
Speed
720 & 900 rpm
Duty Cycle
Standby, Prime, Continuous
Engine Specifications
Engine Model
3608 I-8,4-Stroke Water-Cooled Diesel
Bore
11in
Stroke
11.8in
Displacement
9064in³
Compression Ratio
13:01
Aspiration
TA
Fuel System
Direct unit injection
Governor Type
Generator Set Monitoring System (GMS)
Generator Set Dimensions
Length - Maximum
404in
Width - Maximum
99.62in
Height - Maximum
156.6in
Dry Weight - Genset (maximum)
91050lb

Standard Equipment:

Air Inlet System
  • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Breather, crankcase, top-mounted
  • Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
  • Air inlet shutoff
 
Cooling System
  • Engine coolant water drains
  • Jacket water thermostats
  • Water temperature regulator
 
Exhaust System
  • Includes adapter, flexible exhaust fitting
  • 457 mm (18 in) Cat bolt pattern
  • Dry, gas tight, exhaust manifold
 
Fuel System
  • Simplex or duplex
 
Generator System
  • Custom generator per generator data sheet completed by dealer
 
Governor System
  • UG Actuator
 
Lube System
  • Oil filler and dipstick
  • Crankcase explosion relief valves
  • Oil pressure regulating valve
  • Service side engine mounted on cylinder block inspection covers
  • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
  • Centrifugal oil filters with single shutoff
 
Mounting System
  • Engine and generator mounting
  • Damper, torsional vibration
 
Starting / Charging System
  • Air silencer
  • Vane type air starter
  • One motor, engine mounted at rear, on left side
  • Line group for single point custom connection
 
General:
  • Paint, Caterpillar yellow
  • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
 

Optional Equipment:

Air Inlet System
  • Air cleaner louver assembly
  • Boost control valve
  • Soot filter
  • Vertical support bracket
  • Heavy duty air cleaner
  • Air inlet adapter
 
Cooling System
  • Heating aids
  • Auxiliary water pump
  • Cooling system aids
  • Expansion tank
 
Exhaust System
  • Weld flange and related hardware
  • Flexible exhaust fittings
 
Fuel System
  • Fuel priming pump
  • Fuel system connections
  • Duplex primary fuel strainer
 
Generator System
  • 3 Phase, six Leads, WYE
  • Class F insulation
  • Busbar connections
  • Winding temperature detectors
  • Anti-condensation space heaters
 
Governor System
  • Battery backup/power supply
  • EGB actuator
  • 2301 A load share
  • Electronic/actuators
  • Digital programmers
  • 723 Plus
 
Lube System
  • Oil pan drain valve
  • Lube ANSI adapter (Emergency connection)
 
Mounting System
  • Spring type vibration isolators
  • Isolator
  • Vertically restrained
  • Non-vertically restrained
 
Starting / Charging System
  • Pressure reducing valve
  • Compressed air flex hose
 
General:
  • Custom paint colors
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product