C7.1 ACERT

C7.1 ACERT

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Generator Set Specifications
Minimum Rating
135 kVA
Maximum Rating
220 kVA
Emissions/Fuel Strategy
Non Regulated, EU Stage IIIA
Voltage
110 to 480 Volts
Frequency
50 Hz
Speed
1500 rpm
Duty Cycle
Standby, Prime
Engine Specifications
Engine Model
Cat® C7.1
Bore
4.1in
Stroke
5.3in
Displacement
427.8in³
Compression Ratio
16.0:1, 18.2:1
Aspiration
Turbocharged, Air to Air Aftercooled
Fuel System
Direct Injection
Governor Type
Mechanical
Generator Set Dimensions
Length - Maximum
98.4in
Width - Maximum
52in
Height - Maximum
64in

Standard Equipment:

Air Inlet System
  • Air cleaner; light duty with disposable element
 
Control Panels
  • EMCP 4.1
 
Cooling System
  • Radiator and cooling fan with guards
  • Fan drive, battery charging alternator drive
  • Coolant drain line with valves
  • Caterpillar extended life coolant
 
Fuel System
  • Base, formed steel with single wall integral 8-hour fuel tank
  • Standard open set fuel tank / base supplied
 
Exhaust System
  • Stub pipe, gaskets, raincap and SAE exhaust flange for customer use; shipped loose
 
Generator And Generator Attachments
  • Segregated low voltage (AC/DC) wiring panel
  • Voltage regulator (single phase sensing)
  • Tower panel, IP22, bottom cable entry
  • 12 Leads
 
Governing System
  • Mechanical and electrical governing system - model dependent
 
Lube System
  • Oil drain line with valve
  • Lubricating oil
 
Generators And Generator Attachments
  • IP23 protection
  • Circuit breaker, IEC, 3 pole, mounted in tower panel
 
Mounting System
  • Includes lifting provision and drag points
  • Captive linear vibration isolators between base and engine-generator
  • Captive linear vibration isolators between base and engine-generator
  • Termination points for coolant and lube oil drain lines
 
Starting / Charging System
  • 24V battery with rack and cables
 
General
  • Engine and alternator pre-paint, Caterpillar Yellow
 

Optional Equipment:

Alternator System
  • 3 Phase sensing
  • Optional LC frame alternators
  • Optional LC frame alternator with coastal insulation protection
  • R frame auxiliary winding: R2273L4 SE aux alt 07, aux alt 08 and aux alt 10
  • Permanent magnet
  • Quatrature droop king
  • Alternator removal
  • Anti-condensation heater
 
Circuit Breakers
  • 4 Pole 250A, 400A and 630 A Circuit Breakers
  • Padlockable breaker device
 
Control System
  • 1000001235
  • Static battery charger
  • Control panel heater
  • Volt free contacts for common alarm
  • Volt free contacts for generator set running
 
Control Panel Options
  • Overload shutdown via breaker
 
Cooling System
  • Low coolant level shutdown
  • Coolant heater
  • Low coolant temperature
 
Enclosures
  • Rental options (CAE only) - Single point lift
  • Rental options (CAE only) - Rental pack
  • Rental options (CAE only) - CEE form sockets for enclosure
  • Sound attenuated level 2 enclosure
  • Sound attenuated level 1 enclosure
  • Rental options (CAE only) - Socket blanking plate
 
European Certifications
  • Upgrade to STD set for CE
 
Fuel Systems
  • Skidbase for CALG enclosure sets
  • Open set narrow tankbase
  • Low fuel level alarm
  • DEFRA bunded fuel tank
  • Low fuel level shutdown
  • High fuel level alarm
  • Compact skidbase for open sets
 
Global Certifications
  • Certification for CIS
 
Mounting Options
  • Electronic governor
  • Industrial silencer removal
  • Residential silencer
  • Battery removal
  • Silencer installation kit
 
Test Reports
  • PGS test report @ 1.0 power factor
  • PGS test report @ 0.8 power factor
 
General
  • Stone guards / radiator trans flange
 
Power Termination
  • Circuit breaker, IEC, 4 pole
 
Accessories / Miscellaneous
  • Packing case - compact set
  • Packing case - canopied set
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product