DE605 GC (50 Hz) Generator Set
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
-
Generator Set Specifications
-
- Maximum Rating
- 605 kVA
- Minimum Rating
- 605 kVA
- Emissions/Fuel Strategy
- Non Regulated
- Voltage
- 380 to 415 Volts
- Frequency
- 50 Hz
- Speed
- 1500 rpm
- Duty Cycle
- Standby
-
Engine Specifications
-
- Engine Model
- C15 In-line 6, 4-cycle diesel
- Bore
- 5.4in
- Stroke
- 6.8in
- Displacement
- 928in³
- Compression Ratio
- 16.1:1
- Aspiration
- Turbocharged Air-to-Air Aftercooled
- Fuel System
- EUI
- Governor Type
- Adem™A4
-
Generator Set Dimensions
-
- Length - Maximum
- 131in
- Width - Maximum
- 60.6in
- Height - Maximum
- 86.1in
- Dry Weight - Genset (maximum)
- 8120lb
Standard Equipment:
-
Engine
-
- Cat® C15 Inline 6 cylinder, 4 stroke diesel
-
Control Panels
-
- GCCP 1.1
-
Air Inlet
-
- Air cleaner
-
Governor
-
- Mechanical governor
-
Alternator
-
- A Frame standard alternator
-
Cooling
-
- Package mounted radiator
-
Fuel Storage
-
- Single wall 8 hour fuel tank
-
Cooling System
-
- Caterpillar extended life coolant
- Radiator and cooling fan with guards
- Fan drive, battery charging alternator drive
-
Electrical Options
-
- 3 Pole Circuit breaker
- Neutral earth link
- 24 Volt battery with rack and cables
-
Fuel
-
- Secondary fuel filters
- Fuel priming pump
- Primary fuel filter with integral water separator
-
Air Inlet System
-
- Air cleaner; light duty with disposable element
-
Generator
-
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
-
Lube System
-
- Lubricating oil
- Oil drain line with valve
-
Mounting System
-
- Captive linear vibration isolators
- Lifting provision and drag points
-
General
-
- Engine and alternator pre paint, Caterpillar yellow
- Engine and alternator pre paint, Caterpillar yellow
-
Power Termination
-
- Busbar
-
Generator And Attachments
-
- Power center, IP22
- Segregated low voltage (AC/DC) wiring panel
- Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
-
Mounting
-
- Rubber vibration isolators
-
Governing System
-
- Cat electronic governor (ADEM A4).
-
Lube System
-
- Oil cooler
- Oil drain valves
-
Mounting System
-
- Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Optional Equipment:
-
Exhaust
-
- Industrial, residential, critical mufflers
-
Control Panel
-
- Speed and Voltage adjust potentiometers
- PLG 4G/3G/Ethernet
- Annunciator
- Emergency E-Stop
-
Enclosure
-
- Cat GC enclosure
-
Generator
-
- Anti-condensation heater
- Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
- Oversize and premium generators
-
Electrical Options
-
- 4 Pole Circuit breaker
- Auxiliary contacts
- Padlockable circuit breaker
- Battery charger
- Wet battery
-
Power Termination
-
- Circuit breakers, IEC compliant
- Circuit breakers, UL listed
-
Alternator
-
- Space heater
- AVR
-
Fuel System
-
- Dual wall 8 hour fuel tank
- Single wall 8 hour fuel tank with spill containment
- Low fuel level shutdown
- Low and high fuel level alarms
- Manual fuel transfer pump
- Fuel transfer system controls
- Dual wall fuel tank base
-
Generator And Attachments
-
- Oversize A Frame generator
- LC frame CIP generator
- Permanent magnet excitation (PMG) generator
- Space heaters
- Ingress protection
- LC frame generator
- A Frame generator - IP21 Protection
- CIP A Frame generator
- Oversize LC frame generator
-
Starting/charging
-
- Charging alternator
- Jacket water heater
- Battery chargers
- Oversize batteries
- Heavy duty starting system
- 24 Volt battery with rack and cables
-
Air Inlet System
-
- Single stage air filter
- Dual element air filter
-
Certifications
-
- EU Certificate of Conformance (CE)
- EAC Certification
-
General
-
- Automatic transfer switches (ATS)
- EEC Declaration of Conformity
- Integral & sub-base UL listed dual wall fuel tanks
- Single or dual wall sub-base fuel tanks
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- CSA Certification
- UL 2200 package
- The following options are based on regional and product configuration:
- Single or dual wall integral fuel tanks
- EU Certificate of Conformance (CE)
- Sound attenuated, weather protective or high ambient weather protective enclosure
- Narrow, wide or skid base
-
Extended Service Coverage
-
- 3, 4, 5 and 10 Years
-
Enclosures
-
- High ambient sound attenuated enclosures
-
Exhaust System
-
- Industrial silencer
- 10 dBA Attenuation silencer
- Manifold and turbocharger guards
- End in/end out mufflers - 10, 25 and 35 dBA attenuation
- Flexible exhaust fittings
- 6 and 8 inch elbow kit
- 6 and 8 inch flange GP
- Engine mounted muffler
-
Lube System
-
- Manual sump pump
-
Mounting System
-
- Narrow skid base - replaces standard fuel tank base
-
Special Test / Reports
-
- PGS Test report @ 1.0 power factor
- PGS Test report @ 0.8 power factor
-
Starting / Charging System
-
- 5 Amp single Battery charger
- Battery disconnect switch
- Jacket water heater