DE660 GC (50 Hz) Generator Set
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
-
Generator Set Specifications
-
- Maximum Rating
- 660 kVA
- Minimum Rating
- 660 kVA
- Emissions/Fuel Strategy
- Non Regulated
- Voltage
- 380 to 415 Volts
- Frequency
- 50 Hz
- Speed
- 1500 rpm
- Duty Cycle
- Standby
-
Engine Specifications
-
- Engine Model
- C15 In-line 6, 4-cycle diesel
- Bore
- 5.4in
- Stroke
- 6.8in
- Displacement
- 928in³
- Compression Ratio
- 16.1:1
- Aspiration
- Turbocharged Air-to-Air Aftercooled
- Fuel System
- EUI
- Governor Type
- Ademā¢A4
-
Generator Set Dimensions
-
- Length - Maximum
- 131in
- Width - Maximum
- 60.6in
- Height - Maximum
- 86.1in
- Dry Weight - Genset (maximum)
- 8364lb
Standard Equipment:
-
Engine
-
- Cat® C15 Inline 6 Cylinder, 4 Stroke Diesel
-
Air Inlet
-
- Air Cleaner
-
Control Panels
-
- GCCP 1.1
-
Governor
-
- Mechanical Governor
-
Cooling
-
- Package mounted radiator
-
Alternator
-
- A Frame Standard Alternator
-
Fuel Storage
-
- Single Wall 8 Hour Tank
-
Cooling System
-
- Radiator and cooling fan with guards
- Fan drive, battery charging alternator drive
-
Fuel
-
- Fuel priming pump
- Primary fuel filter with integral water separator
- Secondary fuel filter
-
Electrical Options
-
- 3 Pole Circuit Breaker
- Neutral Earth Link
- 24 Volt battery with rack and cables
-
Air Inlet System
-
- Air cleaner; light duty with disposable element
-
Generator
-
- Matched to the performance and output characteristics of Cat engines
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
- IP23 Protection
-
Lube System
-
- Lubricating oil
- Oil drain line with valve
-
Mounting System
-
- Captive linear vibration isolators
- Lifting provision and drag points
-
General
-
- Engine and alternator pre paint, Caterpillar yellow
- Engine and alternator pre paint, Caterpillar yellow
-
Power Termination
-
- Bus Bar
-
Generator And Attachments
-
- Power center, IP22
- Segregated low voltage (AC/DC) wiring panel
- Optional LC frame generator - IP23 Protection
- Integrated Voltage Regulator
- Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
-
Mounting
-
- Rubber vibration isolators
-
Governing System
-
- Cat Electronic Governor (ADEM A4).
-
Lube System
-
- Oil cooler
- Oil drain valves
-
Mounting System
-
- Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Optional Equipment:
-
Control Panel
-
- PLG 4G/3G/Ethernet
- Annunciator
- Emergency E-Stop
-
Exhaust
-
- Industrial, Residential, Critical Mufflers
-
Enclosure
-
- Cat GC Enclosure
-
Generator
-
- Oversize and premium generators
- Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
- Anti-condensation heater
-
Electrical Options
-
- 4 Pole circuit breaker
- Auxiliary Contacts
- Pad-lockable circuit breaker
- Battery Charger
- Wet Battery
-
Power Termination
-
- Circuit breakers, UL listed
- Circuit breakers, IEC compliant
-
Alternator
-
- Space Heater
- AVR
-
Generator And Attachments
-
- Oversize A frame generator
- LC frame generator
- LC frame CIP generator
- Ingress protection
- CIP a frame generator
- Permanent magnet generator
- Oversize LC frame generator
- Space heaters
-
Starting/charging
-
- Oversize batteries
- Charging alternator
- Jacket water heater
- Battery chargers
- Heavy-duty starting system
- 24 Volt battery with rack and cables
-
Air Inlet System
-
- Single Stage Air Filter
- Dual Element Air Filter
-
Certifications
-
- EU certificate of conformance
- EAC certification
-
General
-
- The following options are based on regional and product configuration:
- Sound attenuated, weather protective or high ambient weather protective enclosure
- UL 2200 package
- CSA Certification
- Narrow, Wide or Skid Base
- EEC Declaration of Conformity
- EU Certificate of Conformance (CE)
- Single or dual wall sub-base fuel tanks
- Single or dual wall integral fuel tanks
- Automatic transfer switches (ATS)
- Integral & sub-base UL listed dual wall fuel tanks
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
-
Extended Service Coverage
-
- 3, 4, 5 and 10 Years
-
Enclosures
-
- High ambient sound attenuated enclosures
- Sound attenuated enclosures
-
Exhaust System
-
- Industrial Silencer
- 10 dBA Attenuation silencer
- 6 and 8 inch elbow kit
- Flexible exhaust fittings
- 6 and 8 inch flange GP
- Manifold and turbocharger guard
- End in / End out mufflers - 10, 25 and 35 dBA attenuation
- Engine mounted muffler
-
Fuel System
-
- Dual Wall 8Hr Fuel Tank
- Single Wall 8Hr Fuel Tank with Spill Containment
- Low Fuel Level Shutdown
- Low and High Fuel Level Alarms
- Manual fuel transfer pump
- Dual wall fuel tank base
- Fuel transfer system controls
-
Lube System
-
- Manual sump pump
-
Mounting System
-
- Narrow skid base - replaces standard fuel tank base
-
Special Test / Reports
-
- PGS Test report @ 1.0 power factor
- PGS Test report @ 0.8 power factor
-
Starting / Charging System
-
- 5 Amp single battery charger
- Jacket water heater
- Battery disconnect switch