-
Generator Set Specifications
-
- Maximum Continuous Rating
-
1200 ekW
- Fuel Type
-
Natural Gas
- Maximum Electrical Efficiency
-
42.30%
- Maximum Standby Rating
-
-
- Frequency
-
50 Hz
- Speed
-
1500 rpm
-
Generator Set Dimensions
-
- Length
-
181in
- Width
-
65in
- Height
-
89in
- Dry Weight - Genset
-
27475lb
-
Engine Specifications
-
- Bore
-
6.7in
- Aspiration
-
TA
- Engine Model
-
G3512E
- Stroke
-
7.5in
- Displacement
-
3158in³
Standard Equipment:
-
Air Inlet
-
- Two-element single-stage air cleaner with enclosure and service indicator
-
Control Panel
-
-
Cooling
-
- Jacket water and SCAC engine-driven pumps
- Jacket water and SCAC thermostats
-
Exhaust
-
- Dry exhaust manifolds, insulated and shielded
- Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
- Cat-flanged face outlet on turbocharger
-
Fuel System
-
- Engine-installed electronic control valve
- 24V DC energized-to-run (ETR) gas shutoff valve
- Gas pressure regulator
-
Fuel System
-
- Electronic fuel metering valve
- Throttle plate, 24V DC actuator, controlled by GECM
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
-
General
-
- Paint- Caterpillar Yellow except rails are gloss black
- Parts book
- Crankshaft vibration damper and guard
- Operation and maintenance manuals
- RH Service
-
Generator
-
- SR4B
- Permanent Magnet Excitiation
- Caterpillar's Digital Voltage Regulator (CDVR) including reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, and a min/max exciter
- Anti-condensation space heater
- Winding temperature detectors
- NEMA Class H insulation
-
Governing System
-
-
Ignition System
-
- Electronic Ignition System (controlled by GECM)
- Individual Cylinder Detonation Sensitive Timing (DST)
-
Starting/charging
-
Optional Equipment:
-
Air Inlet
-
- Mounting brackets and piping
- Air cleaner with precleaner
-
Circuit Breakers
-
- Frame mounting
- Right, left, rear mounted
- 3-pole (IEC 947-2 rated)
- 100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
- S LSI, G LSIG, P LSIG-P, 4th Digit Type
- 1200A, 3 Pole, UL-100% Rated P-Frame Circuit Breakers
- 1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
- 2000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
-
Cooling
-
- Remote radiator for JW and SCAC circuits, level switch included but not wired
- Coolant level drain line with valves, fan with guard
- Inlet/Outlet connections
-
Control Panel
-
- Local alarm module
- Remote annunciator
- Local PC monitoring
- Remote PC monitoring
- Engine failure relay
-
Exhaust
-
- 305 mm (12 in.) Flange
- 250mm-329mm Flange Expander
- Flexible fittings
-
Fuel System
-
- Remote mounted gas train, sized for 31.5 MJ/Nm3 (800 btu/cu ft) dry pipeline natural gas with inlet pressure range of 19.2 to 48.3 kPa (2.78 to 7 psi).
-
General
-
- US AID emblem
- Special paint order
- Tool set
- Digital diagnostic tool
-
Generator
-
- Cable access box
- Bearing temperature detectors
- Generator air filter
- European bus bars
-
Starting/charging
-
- 24V starting motors
- Battery with cables and rack (shipped loose)
- Jacket water heater
- 45A, 24V charging alternator (requires engine driven pumps)
- 20A, 24VDC battery charger
