G3520H Gas Generator
G3520H Gas Generator
-
Generator Set Specifications
-
- Continuous Rating
-
2519 / 2500 ekW @ 1.0pf
- Fuel Type
-
Natural Gas, Hydrogen Blend (up to 25%)
- Maximum Electrical Efficiency
-
45.30%
- Frequency
-
50 / 60 Hz
- RPM
-
1500
- Frequency
-
50/60 Hz
-
Engine Specifications
-
- Engine Model
-
G3520H
- Displacement
-
5956in³
- Aspiration
-
TA
- Bore
-
6.7in
- Stroke
-
8.5in
- Compression Ratio
-
12.1
-
Generator Set Dimensions
-
- Length
-
302in
- Width
-
86in
- Height
-
97in
- Dry Weight - Genset
-
54675lb
Standard Equipment:
-
Control Panel
-
-
Air Inlet
-
- Two-element single-stage air cleaner with enclosure and service indicator
-
Cooling
-
- Engine driven water pumps for jacket water and aftercooler
- Jacket water and SCAC thermostats
- ANSI/DN customer flange connections for JW inlet and outlet
-
Circuit Breaker
-
- LSI Long-Time, Short-Time, Instantaneous Annunciator
- Rear-mounted
- 5000A 3-Pole IEC Rated Circuit Breakers
-
Exhaust
-
- Center section cooled turbocharger with Cat flanged outlet
- Dry exhaust manifolds, insulated and shielded
- Individual exhaust port and turbocharger outlet wired to Integrated Tmeperature Sensing Module (ITSM) with GECM providing alarms and shutdowns
-
Fuel System
-
- Electronic fuel metering valve
- Throttle plate, 24V DC actuator, controlled by GECM
-
Fuel System
-
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
-
Ignition System
-
- Electronic Ignition System (controlled by ADEM A4)
- Individual Cylinder Detonation Sensitive Timing (DST)
-
Generator
-
- Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
- SR4B
- Crankshaft Vibration Damper and Guard
- Busbar connections
- Paint- Caterpillar Yellow except rails gloss black
- Winding temperature detectors
- Operation and maintenance manuals
- Parts book
- Anti-condensation space heater
- RH Service
- SR5
- Reactive droop
-
Govrerning System
-
- ADEM A4 4-20mA (0-5VV) Speed Input
Optional Equipment:
-
Air Inlet
-
- Mounting Brackets and Piping
- Air cleaner with precleaner
-
Circuit Breaker
-
- MP- Frame 6 Pole Bottom Cable Entry
- 4000/5000A Neutral Current Transformer Automatic Selection
- No UV trip or package mounted CB Wiring
- Frame Mounting
-
Control Panel
-
- 16 Point/32 Light Annunciator, Shipped Loose
- Remote Communications Module (PL1000T, PL1000E)
- Remote annuciator
- Local PC Monitorring
- Discrete I/O Module, 12 Digital Inputs, 8 'Form C' Relay
- Cat Connect: Ehternet, Satellite, Cell Telematics
- Engine failure relay
- Local alarm module
- Synchronizing module
- Remote PC Monitorring
-
Cooling
-
- Inlet/Outlet connections
- Coolant level drain line with valves, fan with guard
-
Exhaust
-
- Muffler and spark-arresting muffler with companion flanges
- Flange
- Elbow
- Flexible Fitting
- Exhaust Expander
-
Fuel System
-
- Gas Knockdown Regulator
- Fuel filter
- Gas pressure regulator
- Gas shutoff valve 24V, ETR (Energized-To-Run)
-
Generator
-
- Bearing temperature detectors
- Cable access box
- Low voltage extension box
- Manual voltage control
- European bus bar
- Generator air filter
- Medium and high voltage generators and attachment
-
General
-
- Digital diagnostic tool
- Special paint order
- Tool set
- US AID Emblem
-
Starting/charging
-
- Battery with cables and rack (shipped loose)
- 24V starting motors
- Jacket water heater
- 60A, 24V charging alternator (requires engine driven pumps)
-
Grid Code Compliance
-
- 60 Hz: USA
- 50 Hz: Germany, Great Britain, Belgium, Romania, Italy, Ireland, Poland, Netherlands, Spain, France, and European Standard