Gas Generator G3516B
G3516B Generator Set
-
Generator Set Specifications
-
- Maximum Continuous Rating
-
1300 ekW
- Fuel Type
-
Natural Gas
- Maximum Electrical Efficiency
-
35.70%
- Maximum Standby Rating
-
1300 kW
- Frequency
-
60 Hz
- RPM
-
1800
-
Engine Specifications
-
- Engine Model
-
G3516B
- Displacement
-
4210in³
- Aspiration
-
TA
- Bore
-
6.7in
- Stroke
-
7.5in
-
Generator Set Dimensions
-
- Length
-
165in
- Width
-
85in
- Height
-
95in
- Dry Weight - Genset
-
27823lb
Standard Equipment:
-
Air Inlet
-
- Single element canister type air cleaner with service indicator
- Modular air cleaner, single element service indicator
-
Control Panel
-
-
Cooling
-
- CAT flange connections
- Engine driven water pumps for jacket water and aftercooler
- Jacket water and SCAC thermostats
-
Circuit Breaker
-
- Left, Right, or Rear-Mounted
- 1600A-2000A, 3-Pole UL Rated Circuit Breakers
-
Exhaust
-
- Provides exhaust port temperatures and stack temperature to customer supplied screen via CCM
- Dry exhaust manifolds, insulated and shielded
- CAT flanged faced outlets
-
Fuel System
-
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
- 24V DC engerized-to-run gas shutoff valve
- Throttle plate, hydraulically actuated and controlled by GECM
-
Fuel System
-
- Electronic fuel metering valve
- Gas shutoff valve
- Electric air-fuel ratio control
-
Ignition System
-
- Individual Cylinder Detonation Sensitive Timing (DST)�
- Electronic Ignition System (controlled by GECM)
-
Generator
-
- Stator RTDs
- Form would stator
- Permanent magnet excitation
- IEC Platinum stator RTDs
- Caterpillar's digital voltage regulator (CDVR) with droop capability, 3-phase sensing, KVAR/PF modes
- Anti-condensation space heater
- Winding temperature detectors
-
Govrerning System
-
Optional Equipment:
-
Air Inlet
-
- Air inlet adapters- rectangular or round
-
Circuit Breaker
-
- 3 Pole UL 489 Listed
- 3 Pole IEC 947-2 Rated
- 1200A, 1600A, 2000A, 2500A, 3200A circuit breaker with shunt trip and auxiliary contacts
-
Control Panel
-
- Local alarm module
- PL1000E/PL1000T communications module
- Synchronizing module
- Engine failure relay
- Remote annuciator
- Customer Interface Module
-
Cooling
-
- Flexible connection for jacket water inlet and outlet
-
Exhaust
-
- 203mm/305mm Elbow
- Flexible Fitting (203mm)
- Flange
- 15 dBA, 356mm (14 in) muffler attenuation
- Exhaust Expander
-
Fuel System
-
- Fuel filter/ Gas filter
- 206-412 kPa (30-60psi) gas knockdown regulator
-
Generator
-
- Generator air filter
- Low voltage extension box
- 2400V delta conversion
- Medium and high voltage generators and attachment
- Manual voltage control
- Bearing temperature detectors
- 3-phase, 380/480/600/4160V @ 1800rpm generator (60 Hz)
- European bus bar
- Cable access box
-
General
-
- Digital diagnostic tool
- US AID Emblem
- Tool set
- Special paint order
-
Starting/charging
-
- Charging alternator
- 10A/20A Battery charger
- Jacket water coolant heater
- Electric starting motor LH
- 24V Battery Set