Gas Generator G3516H

Gas Generator G3516H

G3516H Generator Set

Generator Set Specifications
Maximum Continuous Rating
2027 / 2007 ekW @ 1.0pf
Fuel Type
Natural Gas
Maximum Electrical Efficiency
45.30%
Frequency
50 / 60 Hz
RPM
1500 / 1800 rpm
Engine Specifications
Engine Model
G3516H
Displacement
4765in³
Aspiration
TA
Bore
6.7in
Stroke
8.5in
Compression Ratio
12.1
Fuel System
Natural Gas
Generator Set Dimensions
Length
291in
Width
84in
Height
95in
Dry Weight - Genset
40384lb

Standard Equipment:

Control Panels
  • EMCP4.3
 
Air Inlet
  • Package Mounted Air Cleaner with service indicator
  • Two-element single-stage air cleaner with enclosure and service indicator
 
Cooling
  • Jacket water and SCAC driven thermostats
  • ANSI Class 150/DN custom flange connections for JW inlet and outlet
  • Engine driven water pumps for jacket water and after cooler
  • 2nd stage SCAC-Cat Flange
 
Exhaust
  • Center section cooled turbocharger with Cat flanged outlet
  • Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
  • Dry exhaust manifolds, insulated and shielded
  • Cat-flanged face outlet on turbocharger
 
Fuel System
  • Throttle plate, 24V DC actuator, controlled by GECM
  • Electronic fuel metering valve
  • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
 
Ignition System
  • Electronic Ignition System (controlled by ADEM A4)
  • Individual Cylinder Detonation Sensitive Timing (DST)
 
Generator
  • Permanent Magnet Excitiation
  • Anti-condensation space heater
  • Winding temperature detectors
  • SR5
  • Reactive Droop
  • Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
 
General
  • Crankshaft vibration damper and guard
  • Paint - Caterpillar Yellow except rails and radiators gloss black
  • RH Service
  • Parts book
  • Operation and maintenance manuals
 
Governing System
  • ADEM A4 4-20mA (0-5V) Speed Input
 
Starting/charging
  • 24V starting motors
 

Optional Equipment:

Air Inlet
  • Mounting brackets and piping
  • Air cleaner with precleaner
  • Heavy Duty air cleaner with precleaner
 
Circuit Breakers
  • No UV trip or package mounted CB Wiring
  • Frame Mounting
  • MP-Frame 3 Pole Bottom Cable Entry or MP- Frame 6 Pole Bottom Cable Entry
  • 4000A, 3-Pole IEC Rated
  • 2500/3000/3200A or 4000/5000A Neutral Current Transformer Automatic Selection
  • Lower & Upper Covers, Extension Box Roof Cover
  • Busbar Mounting
  • 4000A, 3-Pole UL Rated
 
Control Panels
  • Remote monitoring software
  • Discrete I/O Module, 12 Digital Inputs, 8 'Form C' Relay
  • Remote RS485, 32-light Annunciator
  • Cat Connect: Ehternet, Satellite, Cell Telematics
  • Cross-Current Compensation Current Transformer-- 8.7/15 kV Classes
  • RTD Module
  • Local/Remote PC Monitorring
  • 16 Point/32 Light Annunciator with NFPA99-110/CSA282 Configuration
  • Remote Monitoring & Control
  • Synchronizing module
  • Local alarm module
 
Cooling
  • Jacket water coolant heater
  • Inlet/Outlet connections
 
Exhaust
  • Flange
  • Muffler and spark-arresting muffler with ANSI companion flanges
  • Elbow
 
Generator
  • Manual voltage control
  • Generator air filter
  • Low voltage extension box
  • Medium and high voltage generators and attachment
  • Cable access box
  • Bearing temperature detectors
 
Starting/charging
  • 24V Battery Charger
  • 60A, 24V charging alternator (requires engine driven pumps)
 
General
  • US AID emblem
  • Special paint order
  • Battery diconnect switch
  • Digital diagnostic tool
  • Tool set
  • Battery with cables and rack (shipped loose)
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product