Cat® 3516C Industrial Diesel Engine - Thompson Tractor

Cat® 3516C Industrial Diesel Engine

Cat® 3516C Industrial Diesel Engine

Cat® 3516C Industrial Diesel Engine

The Cat® 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. It offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.

Power Rating
Maximum Power
2100HP
Maximum Torque
7563lb-ft @ 1300 rpm
Rated Speed
1750 rpm
Minimum Power
2100HP
Emission Standards
Emissions
U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
Engine Dimensions - Approximate
Length
129.1in
Width
60.2in
Height
81.2in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
17284lb
General
Engine Configuration
V-16, 4-Stroke-Cycle Diesel
Bore
6.7in
Stroke
8.5in
Displacement
4760in³
Compression Ratio
14.7:1
Aspiration
Turbocharged Aftercooled
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-

Standard Equipment:

Air Inlet System
  • Air to Air Aftercooled (ATAAC)
  • Four turbochargers, center mounted
 
Control System
  • ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
 
Cooling System
  • Thermostats and housing
  • Gear driven centrifugal jacket water pump
  • Connections for radiator cooling
 
Exhaust System
  • Exhaust manifold, dry
  • Four turbochargers with watercooled bearings
  • Two exhaust outlets, 203 mm (8 in) round flange
 
Flywheels And Flywheel Housing
  • SAE No. 00 flywheel (183 teeth)
  • SAE No. 00 flywheel housing
 
Fuel System
  • Fuel filter, LH spin-on type
  • Fuel transfer pump
  • Electronically controlled unit injectors
 
Instrumentation
  • No standard instrument or gauge panel
 
Lube System
  • Crankcase breather, top mounted
  • Oil cooler
  • Oil filler and dipstick, LH
  • Oil pump
  • Oil filter, LH, spin-on type
  • Front sump oil pan, 500-hour change interval
 
Mounting System
  • Trunnion front support
 
Power Take Off
  • Front housing, two-sided
 
Protection System
  • ADEM A4 ECM monitoring system to provide customer programmable engine
  • Deration strategies to protect against adverse operating conditions
  • Emergency stop logic inputs provided at 40 pin customer interface connection
 
Starting System
  • Dual 24V electric starting motor, LH, unwired
 
General
  • Paint: Caterpillar yellow
  • Vibration damper
  • Lifting eyes
 

Optional Equipment:

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product