Cat® C2.2 Diesel Engine
Cat® C2.2 Diesel Engine
The Cat® C2.2 Industrial Diesel Engine is offered in ratings ranging from 31-49.3 bkW (41.6-66.1 bhp) @ 2200-3000 rpm. These ratings meet EU Stage IIIA (U.S. EPA Tier 4 Interim equivalent) emission standards. Industries and applications powered by C2.2 engines include: Agriculture, Aerial Lifts, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, General Industrial, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Mobile Sweepers, Paving Equipment, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.
-
Power Rating
-
- Maximum Power
- 66HP
- Maximum Torque
- 153lb-ft @ 1800 rpm
- Rated Speed
- 2200-3000 rpm
- Minimum Power
- 41.6HP
-
Emission Standards
-
- Emissions
- U.S. EPA Tier 4 Interim Equivalent
-
Engine Dimensions - Approximate
-
- Length
- 26in
- Width
- 19.3in
- Height
- 27.5in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 427.7lb
-
General
-
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 3.3in
- Stroke
- 3.9in
- Displacement
- 135in³
- Compression Ratio
- 23.3:1
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
Standard Equipment:
-
Air Inlet System
-
- Inlet manifold with choice of inlets.
-
Control System
-
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
-
Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
Flywheels And Flywheel Housing
-
- SAE No. 7 1/2, SAE No. 8 or SAE No. 10 flywheel
- Choice of SAE No. 4 or standard backplate flywheel housing
-
Fuel System
-
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
Lube System
-
- Alternative oil fillers
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request