Cat® C9.3B Industrial Power Unit
Cat® C9.3B Industrial Power Unit
The Cat® C9.3B Industrial Diesel Power Unit is offered in ratings ranging from 230-310 kW (308-416 hp) @ 1800-2200 rpm and meet Brazil MAR-1 and UN R96 Stage IIIA emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
-
Power Rating
-
- Maximum Power
- 416HP
- Rated Speed
- 1800-2200 rpm
- Minimum Power
- 308HP
-
Emission Standards
-
- Emissions
- Brazil MAR-1, UN R96 Stage IIIA
-
General
-
- Engine Configuration
- Inline 6, 4-Stroke-Cycle-Diesel
- Bore
- 4.5in
- Stroke
- 5.9in
- Displacement
- 567.5in³
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Rotation from Flywheel End
- Counterclockwise
-
Power Unit Dimensions
-
- Length
- 83in
- Width
- 43in
- Height
- 63in
- Weight
- 3265lb
Standard Equipment:
-
Air Inlet System
-
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
-
Control System
-
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
-
Cooling System
-
- Vertical or RH thermostat outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
-
Flywheels And Flywheel Housing
-
- Dual rear PTO configuration
- Available SAE No. 1 power take off with optional SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments.
-
Fuel System
-
- Electronic high pressure common rail
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
-
Lube System
-
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
-
Power Take Off (pto)
-
- SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
-
General
-
- Vibration damper
- Lifting eyes
