Product Description
The Cat® 3054C Industrial Diesel Engine is offered in ratings ranging from 52-97 bkW (69.7-130 bhp) @ 2000-2400 rpm. These ratings meet U.S. EPA Tier 2 equivalent and EU Stage II equivalent emission standards and are available for other regulated and non-regulated areas. Industries and applications powered by 3054C engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.
Power Rating
- Maximum Power
- 130HP
- Maximum Torque
- 369lb-ft @ 1400 rpm
- Rated Speed
- 2200-2400 rpm
- Minimum Power
- 69.7HP
Emission Standards
- Emissions
- U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent
Engine Dimensions - Approximate
- Length
- 26.1in
- Width
- 24.4in
- Height
- 31.9in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 674.6lb
General
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 4.1in
- Stroke
- 5in
- Displacement
- 269in³
- Compression Ratio
- 16.2:1
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
Standard Equipment
-
- Air Inlet System
-
- Inlet manifold with choice of inlets.
-
- Control System
-
- Alternator
- Starter motor
- Control Panel
- Glow plug starting aid
-
- Cooling System
-
- Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
- 50:50 water glycol mix
-
- Flywheels And Flywheel Housing
-
- SAE No. 3 flywheel housing
- Flywheel and starter rings
-
- Fuel System
-
- Fuel filter positions
-
- Lube System
-
- Lubricating oil filters and breathers
- Oil filter positions
- Lube oil sump
-
- Power Take Off
-
- SAE B Power Take Off (PTO)
-
- General
-
- Timing case and gear-driven auxiliaries
- Belt-driven auxiliaries
- Engine mountings
- Gauges
- Displays
- Power and torque curve tailoring
- Paint: Caterpillar yellow, with optional colors available at request