Cat C2.2 Marine Generator Set

Cat C2.2 Marine Generator Set

Cat C2.2 Marine Generator Set

Cat® C2.2 Diesel Marine Generator Set has single phase ratings of 50 Hertz at 16.0 and 22.5 ekW and 60 Hertz at 19.0 and 27.0 ekW that meet U.S. EPA Tier 3 and EU IW emission standards.The Cat® C2.2 also has three phase ratings of 50 Hertz at 16.0 and 22.5 ekW and 60 Hertz at 19.5 and 27.0 ekW that meet U.S. EPA Tier 3 and EU IW emissions standards. This marine gen set is available in 12 or 24 volt as an open gen set or as an enclosed package.

Generator Set Specifications
Minimum Rating
16 ekW (16kVA)
Maximum Rating
27 ekW (27 kVA)
Frequency
50 Hz or 60 Hz
Speed
1500 rpm (50Hz) or 1800 rpm (60 Hz
Emissions/Fuel Strategy
EPA Tier 3, IMO NST, EU IW
Engine Specifications
Engine Model
C2.2, In-line 4, 4-Stroke-Cycle Diesel
Aspiration
Naturally Aspirated
Bore
3.31in
Stroke
3.94in
Displacement
135in³
Governor Type
Electrical Ischronous
Fuel System
Fuel filter — RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines
Generator Specifications
Excitation
AREP
Pitch
2/3 pitch
Number of Poles
4
Number of Leads
4
Insulation
Class H
Voltage Regulation
±0.5%
Frame Size
2.2
IP Rating
23
Wave Form Deviation - Line to Line
<2%
Voltage Regulator
Steady State
Dimensions & Weights
Length - Open Set
45in
Width - Enclosed Set
24in
Length - Enclosed Set
46in
Minimum Approximate Weight
857lb
Height - Enclosed Set
31in
Height - Open Set
32in
Width - Open Set
20.5in
Maximum Approximate Weight
1027lb

Standard Equipment:

Air Inlet System
  • Air cleaner, single element canister type with rain cap (open generator set only)
 
Cooling System
  • Belt-driven centrifugal jacket water pump, gear-driven seawater pump, heat exchanger with copper nickel tubes, expansion tank
 
Control System
  • Electronic isochronous governor
 
Exhaust System
  • Watercooled exhaust manifold and elbow
 
Fuel System
  • Fuel filter — RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines
 
Generator
  • Single-phase — brushless, shunt excited, 4-pole, 4-lead reconnectable with class H insulation, automatic voltage regulation ±0.5%, 2/3 pitch, IP23 water protection, solid state voltage regulator with integral voltage adjustment potentiometer, connection poles;
 
Lube System
  • Lubricating oil, oil filter (RH), dipstick (RH), fumes disposal (closed system)
 
Mounting System
  • Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad
 
Protection System
  • Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed
 
Starting System
  • 12 or 24 volt electronic starting motor, 12 volt 55 amp alternator
 
General
  • Single-side service (RH), decals, literature
 

Optional Equipment:

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product