16CM46DF

16CM46DF

Engine Specifications
Maximum Rating
18720kV·A
Bore
18.1in
Displacement
98980.5in³
Stroke
24in
Emissions
IMOII/III
Aspiration
Tubrocharged Aftercooled
Engine Control
Electronic
Dimensions
Length
661in
Weight
690000lb
Width
151in
Height
300in³

Standard Equipment:

Engine
  • Motor-driven barring gear, fitted on engine
  • Emergency shutdown equipment with push button for manual emergency stop
 
Cylinder Head
  • Fuel injector and integrated gas admission valve with easy service and maintenance access
  • Cylinder pressure sensors for highest operational reliability and efficiency, replacing conventional knocking sensor technology
  • Piston, rings and liners designed for operation on gas and liquid fuels
 
Turbocharger
  • Optimized engine efficiency in gas and diesel operation
  • Blow-off valve and waste gate technology for optimized air-fuel ratio control
 
Gas System
  • Double-walled gas piping to support an inherently safe engine room concept
  • Leakage detection
  • Gas valve unit
  • Segmented gas detection system on request
 
Micro Pilot Fuel Injection System
  • Gear driven high pressure fuel pump and filter system with easy service access
  • Reliability combined with service and maintenance simplicity, through individual ignition fuel injector and “in-cylinder head” integrated ignition fuel return pipes
 
Exhaust System
  • Front-mounted turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device
  • Expansion joint separate
  • Separate silencer and spark arrester
 
Fresh Cooling Water System
  • HT pump, fitted on engine
  • LT pump, separate, vertical design, electric motor driven
  • HT thermostat, remote-mounted, electric controlled
  • Cooling water preheating equipment, fitted on base frame
 
Lubricating Oil System
  • Safety filter fitted on engine
  • Force pump, fitted on engine
  • Pre-lubrication pump, fitted on base frame, electric motor driven
  • Automatic back-flushing filter
  • Duplex filter with differential pressure indication, fitted on engine
  • Pressure control valve, fitted on engine
  • Thermostat, remote-mounted, electric controlled
 
Connections
  • Set of connecting parts between flange coupling and flywheel
  • Flexible flange coupling between engine and generator
  • Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator
  • Mounting of engine and generator on the base frame
  • Set of bonded rubber rails for resilient mounting of the base frame
  • Set of flexible pipe connections
 
Instrumentation
  • Gauge board with liquid-dampened pressure gauges for: fuel, lubricating oil, fresh water, starting air and charge air.
  • On-engine thermometers for fuel, lubricating oil, fresh water and charge air
  • Electric remote speed indicator
  • Turbocharger and remote speed indicator
  • Exhaust gas temperature indicator
 
Monitoring
  • Manual control on engine, including: control panel with start/stop key, speed setting device, mechanical shutdown device, changeover of control functions from engine to remote control
  • Starting solenoid valve on engine, 24 V DC
  • Separate electronic speed governor
 

Optional Equipment:

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product