6CM32E

6CM32E

6CM32E

6CM32E Land Production Generator Set

Engine Specifications
Minimum Rating
3630kV·A
Maximum Rating
3630kV·A
Emissions
IMO Tier II
Engine Control
Electronic
Bore
12.6in
Stroke
18.9in
Weight
163934lb
Displacement
14133in³
Generator Set Control
Electronic
Aspiration
Turbocharged-Aftercooled
Dimensions
Height
207.7in
Length
266.22in
Width
103.9in

Standard Equipment:

Engine
  • Motor-driven barring gear, fitted on engine
  • Reversing contractor and push button switch with cable
  • Electronic speed setting equipment with actuator and speed pick-up
  • Emergency shutdown equipment with pushbutton, separate, for manual emergency stop
 
Engine Indicators
  • Gauge board with set liquid damped pressure gauges for: fuel, lubricating oil, fresh water, starting air, and charge air.
  • On-engine thermometers for fuel, lubricating oil, fresh water, and charge air
  • Electric remote speed indicator
  • Turbocharger and remote speed indicator
  • Exhaust gas temperature indicator
 
Control
  • Manual control on engine, including: control panel with start /stop key, speed setting device, mechanical shutdown device, change over of control functions from engine to remote control
  • Starting solenoid valve on engine, 24 V DC
  • Separate electronic speed governor
 
Monitoring For Unattended Operation
  • Pressure switches, mounted on engine, for:
  • Switches for:
  • Control Cabinet with housings for wall mounting, including:
 
Starting Air System
  • Separate non-return valve for the starting air pipe to the engine
 
Air Intake System
  • Air intake filter, fitted on the turbocharger
  • Air bottles, separate
 
Fuel System
  • Separate circulating pump driven by electric motor, horizontal or vertical
  • Duplex filter with differential pressure indication
 
Exhaust System
  • Turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device
  • Expansion joint separate
  • Separate silencer and spark arrester, unlagged 35 dB(A)
 
Fresh Cooling Water System
  • HT pump, fitted on engine
  • LT pump, separate, vertical design, electric motor driven
  • HT thermostat, not powered and separate
  • Engine preheating equipment, fitted on base frame
 
Lubricating Oil System
  • Plate cooler, fitted on engine
  • Force pump, fitted on engine
  • Prelubrication pump, fitted on base frame, electric motor driven
  • Boll and Kirch automatic backflushing filter, separate
  • Duplex filter with differential pressure indication, separate
  • Pressure control valve, separate
  • Thermostat, not powered, separate
 
Connecting Parts - Engine
  • Set of connecting parts between flange coupling and flywheel
  • Flexible flange coupling between engine and generator
  • Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator
  • Mounting of engine and generator on the base frame
  • Set of bonded rubber rails for resilient mounting of the base frame
  • Set of flexible pipe connections
 
Tools
  • Set of tools for the engine including hydraulic tightening tools and nozzle tester
  • Set of tools for turbocharger
  • Inside micrometer for cylinder liners
  • Ruler for cylinder liner
 
Spare Parts
  • Set of engine spare parts for unrestricted operation
  • Set of spare flexible pipe connections
 

Optional Equipment:

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product