C27 ACERT Land Mechanical Drilling Engine

C27 ACERT Land Mechanical Drilling Engine

C27 ACERT Land Mechanical Drilling Engine

Cat C27 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C27 ACERT engines to deliver excellent performance with low operating costs and emissions. This is an ideal engine for land mechanical drilling applications such as mud pump drives. Cat C27 ACERT™ Industrial Diesel Engine. Ratings: 597-858 bkW (800-1150 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards.

Engine Specifications
Minimum Rating
800BHP
Maximum Rating
1150BHP
Emissions
U.S. EPA Non-road Tier 2
Rated Speed
2100r/min
Bore
5.4in
Stroke
6in
Displacement
1658in³
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A3
Engine Weight - Net Dry
6382lb
Oil Change Interval
250
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
Flywheel Teeth
136 (SAE 0), 113 (SAE 1)
Capacity for Liquids
Minimum Cooling System - Engine Only
14.5gal (US)
Dimensions
Length
75.5in
Width
57.6in
Height
52in

Standard Equipment:

Air Inlet System
  • Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection
 
Control System
  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and TEL
  • Electronic diagnostics and fault logging
  • Engine monitoring and protection system (speed, temperature, pressure)
  • J1939 Broadcast (diagnostic, engine status, and control)
 
Cooling System
  • Thermostats and housing — outlet LH vertical orientation
  • Jacket water pump — gear-driven, centrifugal RH
 
Exhaust System
  • Exhaust manifold — dry, heat shields
  • Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
  • Water-cooled center sections
 
Flywheels And Flywheel Housings
  • SAE No. 0 or SAE No. 1
  • SAE standard rotation
 
Fuel System
  • MEUI system
  • Fuel filter, RH ( 2 micron high performance)
  • Fuel transfer pump
  • Fuel priming pump (optional electric priming pump)
 
Lube System
  • Crankcase breather — rear mounted
  • Oil cooler — RH
  • Side turbo — oil filler in RH front gear case
  • Rear turbo — oil filler in RH valve cover
  • Oil level gauge — RH
  • Oil filter — RH
  • Oil pan rear sump
 
Mounting System
  • Front support — narrow
 
Power Take-offs
  • Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide
 
General
  • Vibration damper
  • Paint — Cat yellow
  • Lifting eyes
  • Automatic variable timing, electronic
  • Electronic installation kit 70-pin connector (connectors, pins, sockets)
 

Optional Equipment:

Air Inlet System
  • Air lines
  • Air cleaners
  • Precleaners
 
Charging System
  • Battery chargers
  • Charging alternators
  • Alternator mountings
 
Circuit Breakers
  • Circuit breaker mounting
 
Cooling System
  • Blower fans
  • Suction fans
  • Radiators
 
Exhaust System
  • Muffler
 
Fuel Systems
  • Electric fuel priming pump
 
Instrumentation
  • Gauges and instrument panels
 
Lube System
  • Lubricating oil
  • Oil pan
  • Oil filter
 
Mounting System
  • Engine supports
 
Power Take-offs
  • Hydraulic pump drives
  • Pulley
  • Auxiliary drive
 
Starting System
  • Electric starting motor
  • Battery sets - 24V
  • Battery cable
  • Battery rack
  • Starting aids
 
Packaging
  • Overseas preservation
  • Storage preservation
  • Export packaging
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product