G3516J Gas Engine

G3516J Gas Engine

G3516J Gas Engine

The line of G3500 engines brings versatility, uptime, and low operating cost to your gas compression operation. They are equipped with ADEM A3 technology that enables highest performance and safety while maintaining low emissions. Ideal applications for G3500 engines include gas lift, gas gathering, and wellhead gas compression. The Cat G3516J gas engines are rated at 1029 bkW (1380 bhp) @ 1400 rpm and are NSPS site compliant capable with customer-provided air-fuel ratio control and aftertreatment.

Engine Specifications
Minimum Rating
1380BHP
Emissions
U.S. EPA Spark Ignited Stationary NSPS emissions
Aspiration
Turbocharged-2 Stage aftercooled
Oil Change Interval
1000 hrs
Stroke
7.5in
Bore
6.7in
Maximum Rating
1380BHP
Combustion
Lean Burn
Governor
Electronic (ADEM A3)
Lube Oil System
423 L (112 gal)
Displacement
4211in³

Standard Equipment:

Air Inlet System
  • Axial flow air cleaners
  • Single element canister type with service indicator
 
Cooling System
  • Two-stage charge air cooling system
  • Engine cooling and charge air cooling thermostats
 
Exhaust System
  • Watercooled exhaust manifolds
  • Dry Turbocharger housings
  • Water-cooled exhaust elbow
 
Flywheels & Flywheel Housings
  • SAE No. 00 flywheel housing
  • SAE standard rotation
  • SAE No. 21 Flywheel
 
Fuel System
  • 7-40 psig gas supply
  • Electronic fuel metering valve
  • Gas pressure regulator
  • Gas shutoff valve
  • Fuel System
 
Instrumentation
  • Remote-mounted Advisor control panel
  • Interconnect harness
 
Lubrication System
  • Crankcase breather — top mounted
  • Oil cooler
  • Oil filter — RH
  • Oil pan — shallow
  • Oil sampling valve
  • Turbo oil accumulator
 
Mounting System
  • Rails
 
Protection System
  • Electronic shutoff system
  • Gas shutoff valve
 
General
  • Paint — Cat yellow
  • Crankshaft vibration damper and guard
 
Power Take Offs
  • Front lower LH accessory drive
  • Front housing, two sided
 

Optional Equipment:

Air Inlet System
  • Remote air inlet adapters
  • Rain Shield
 
Charging System
  • CSA Alternator (24V, 65A)
 
Exhaust System
  • Flexible fittings
  • Elbows
  • Flange
  • Mufflers
 
Fuel System
  • Fuel filter
 
Lubrication System
  • Oil bypass filter
  • Deep sump oil pan
  • Air prelube pump
  • Lubricating oil
  • Oil pan drain
 
Power Take-offs
  • Front stub shaft
 
Protection System
  • Explosion relief valves, status control box interconnect wiring harness
 
Starting System
  • 90 psi starter
  • 150 psi starter
 
Eu Certification
  • EEC DOI certification
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product