G3520J Gas Compression Engine - Thompson Tractor

G3520J Gas Compression Engine

G3520J Gas Compression Engine

G3520J Gas Compression Engine

The line of G3520J engines brings versatility, uptime, and low operating cost to your gas compression operation. They deliver the lowest engine-out emissions in the industry without sacrificing performance. Ideal applications for G3520J engines include primary gathering, central gathering, and gas processing plants.

Engine Specifications
Emissions
U.S. EPA Spark Ignited Stationary NSPS emissions for 2010
Minimum Rating
1725BHP
Bore
6.7in
Rotation from Flywheel End
Counterclockwise
Stroke
7.5in
Combustion
Lean Burn
Oil Change Interval
2000 hrs
Capacity for Liquids
Lube Oil System - Refill
143gal (US)
Governor and Protection
Governor and Protection
Electronic (ADEM™ A3)

Standard Equipment:

Air Inlet System
  • Axial Flow Air cleaner
  • Single element canister type with service indicator
 
Cooling System
  • Two-stage charge air cooling: First stage - JW + OC + 1st stage AC / Second stage - 2nd stage AC
  • Jacket water and aftercooler thermostats
 
Exhaust System
  • Water-cooled exhaust manifolds
  • Dry turbocharger housings
  • Water-cooled exhaust elbow
 
Flywheels And Flywheel Housings
  • SAE No. 21 flywheel
  • SAE No. 00 flywheel housing
  • SAE standard rotation
 
Fuel System
  • 7-40 psig gas supply
  • Electronic fuel metering valve
  • Gas pressure regulator
  • Gas shutoff valve
 
Instrumentation
  • Remote-mounted Advisor control panel
  • Product Link cellular radio
 
Lubrication System
  • Crankcase breather — top mounted
  • Oil cooler
  • Oil filter — RH
  • Oil pan — 143 gal
  • Oil sampling valve
  • Turbo oil accumulator
 
Mounting System
  • Rails
 
Power Take-offs
  • Front housing — two-sided
  • Front lower LH accessory drive
 
General
  • Paint — Cat yellow
  • Crankshaft vibration damper and guard
 

Optional Equipment:

Air Inlet System
  • Round air inlet adaptors
  • Rain shield
 
Charging System
  • CSA alternator (24V,65A)
 
Cooling System
  • Jacket water inlet flange-hose connection
 
Exhaust System
  • Flexible fittings
  • Flanges
  • Elbow
 
Fuel System
  • Fuel filter
 
Instrumentation
  • LAN adapter
  • 15',40',90',140' Product Link extension harness
  • 20',30',50',100' interconnect harness
 
Lubrication System
  • Lubricating oil
  • Oil bypass filter
  • Air prelube pump
  • Oil pan drain
 
Power Take-offs
  • Front stub shaft
  • Crankshaft pulley
 
Starting System
  • Air pressure regulator
  • 90 psi starter
  • 150 psi starter
  • Jacket water heater
 
General
  • Special paint
  • Crankshaft vibration double damper
  • Explosion relief valves
 
Eu Certification
  • EEC DOI certification
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product