PM820 Cold Planer

PM820 Cold Planer

The PM820 is a high-production, half-lane milling machine with a cutting width of 2010 mm (79.1 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.

Cutting System
Milling Width
79.1in
Maximum Milling Depth
13in
Rotor Speeds
100 / 109 / 118 rpm
Number of Bits
178
Power Train
Rated Power
800.6HP
Engine
Cat C18 twin-turbo
Maximum Travel Speed
3.7mile/h
Maximum Milling Speed
328ft/min
Weights
Operating Weight
79653lb
Transport Weight
71055lb
Dimensions
Operating Length - Conveyor Up
47.64ft
Operating Width
10.2ft
Height - Canopy
13.29ft
Maximum Truck Clearance
15.94ft
Minimum Right Cutting Radius
6.56ft
Minimum Left Cutting Radius
6.56ft
Conveyor Swing
60 degrees from center
Transport Length
40.78ft
Transport Width
8.27ft
Transport Height
9.84ft
Service Refill Capacities
Cooling System
27.5gal (US)
Engine Oil
17.2gal (US)
Fuel Tank
292.7gal (US)
Hydraulic Tank
29.9gal (US)
Water Spray System Tank
898.2gal (US)

Standard Equipment:

Operator Environment
  • Ground control keypads
  • Single high-resolution LCD touchscreen display
  • 12-volt power receptacle
 
Cat Connect Technology
  • Cat Product Link
  • Cat GRADE
 
Conveyor
  • Grease tensioner
  • Material removal boost feature
 
Rotor System
  • Automatic plunge-cut
  • Automatic transition feature
  • Obstacle jump
  • Three cutting speeds
 
Powertrain
  • Auto engine idle control
  • High capacity cooling system
  • Dual propel pumps
  • Automatic load control
 
Hydraulic System
  • Dual pump hydraulic propel system
  • Traction control
 
Service And Maintenance
  • Sampling ports for Scheduled Oil Sampling (S·O·S℠)
  • Power hood
  • Platform-level engine oil dipsticks
  • Rotor chamber water spray system
  • Air compressor
  • Accessory drive system
  • 3400 L (898 gal) onboard water tank
  • Side water fill valve
 
Safety And Security
  • Platform handrails
  • Signaling/warning horn
  • Wide-dispersion LED work lights
 

Optional Equipment:

Operator Environment
  • Dual high-resolution LCD touchscreen displays
  • Hydraulically folding canopy with LEDs
  • Air-ride suspension seats
  • Windscreens
 
Cat Connect Technology
  • Inboard ski
  • Sonic sensor (averaging or string line)
  • Ground level grade controls and displays
 
Conveyor
  • Dust abatement system
  • Remote camera (loading conveyor)
 
Rotor System
  • System K Rotor - Course (25 mm)
  • System K Rotor - Course (18 mm)
  • System K Rotor - Standard (15 mm)
  • System K Rotor - Fine (8 mm)
  • System K Rotor - Micro (6 mm)
  • System H Rotor - Micro (6x2 mm)
  • Diamond bits
  • Bit bucket trays
  • Pneumatic bit removal tool
  • Tool holder extractor
  • Rotor turning device with pendant control
 
Powertrain
  • CE certificate
 
Hydraulic System
  • Water tank transfer pump
  • Fuel transfer pump
 
Service And Maintenance
  • High pressure washdown
  • Low pressure washdown
  • Additional spray bars
 
Safety And Security
  • Perimeter LED strip lights
  • Magnetic LED work light
  • Warning beacon (fixed or magnetic mount)
  • Truck signal lights
  • Remote camera (rear, front, magnetic mount)
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product