PM313 Track Undercarriage Cold Planer - Thompson Tractor

PM313 Track Undercarriage Cold Planer

PM313 Track Undercarriage Cold Planer

The PM313 is an efficient, highly maneuverable milling machine with a cutting width of 1300 mm (51.2 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.

Cutting System
Milling Width
51.2in
Maximum Milling Depth
13in
Rotor Speeds
97 / 109 / 121 rpm
Number of Bits
111
Power Train
Rated Power
336.6HP
Engine
C9.3
Maximum Travel Speed
3.4mile/h
Maximum Milling Speed
108ft/min
Weights
Operating Weight
48658lb
Transport Weight
45107lb
Dimensions
Operating Length - Conveyor Up
36.45ft
Operating Width
8.33ft
Height - Canopy
12.3ft
Maximum Truck Clearance
15.42ft
Minimum Right Cutting Radius
6.3ft
Minimum Left Cutting Radius
13.58ft
Conveyor Swing
60 degrees from center
Transport Length
30.58ft
Transport Width
8.33lb/in
Transport Height
9.84ft
Service Refill Capacities
Water Spray System Tank
332.9gal (US)
Fuel Tank
158.5gal (US)
Engine Oil
7.9gal (US)
Hydraulic Tank
15.6gal (US)
Cooling System
16.4gal (US)
Diesel Exhaust Fluid (DEF) Tank
5.8gal (US)

Standard Equipment:

Operator Environment
  • Sliding operator station
  • Suspension seat
  • Ground control keypad
  • Single high-resolution LCD touchscreen display
  • 12-volt power receptacle
 
Cat Connect Technology
  • Remote Troubleshoot capability
  • Cat Product Link
  • Cat GRADE
 
Conveyor
  • Material removal boost feature
 
Rotor System
  • Automatic plunge-cut
  • Automatic transition feature
  • Obstacle jump
  • Three cutting speeds
  • System K Rotor - Standard (15 mm)
 
Powertrain
  • Auto engine idle control
  • High capacity cooling system
  • Automatic load control
  • Wheel undercarriage
 
Hydraulic System
  • Traction control
 
Service And Maintenance
  • Ports for Scheduled Oil Sampling (S·O·S℠)
  • Platform-level engine oil dipsticks
  • 1260 L (333 gal) onboard water tank
  • Side water fill valve
  • Water spray system
 
Safety And Security
  • Platform handrails
  • Signaling/warning horn
  • Halogen work lighting
 

Optional Equipment:

Operator Environment
  • Additional high-resolution LCD touchscreen display
  • Powered canopy
  • Windscreens
  • Remote camera with cut edge guidance
 
Cat Connect Technology
  • Sonic sensor (averaging or string line)
  • Ground level grade controls
 
Conveyor
  • Dust abatement system
  • Hydraulic folding conveyor
  • Remote camera (loading conveyor)
 
Rotor System
  • System K Rotor - Course (18 mm)
  • System K Rotor - Fine (8 mm)
  • Diamond bits
  • Pneumatic bit removal tool
  • Tool holder extractor
  • Rotor turning device
  • Ballast kit
 
Powertrain
  • Track undercarriage
  • CE certificate
 
Service And Maintenance
  • Air compressor
  • Accessory drive system
  • High pressure washdown
  • Low pressure washdown
  • Additional water spray system
  • Remote Flash
 
Safety And Security
  • LED work lighting (fixed, pole mounted, magnetic)
  • Warning beacon (fixed)
  • Truck signal lights
  • Roading Lights
  • Remote cameras (rear, front, cutting edges)
 

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Share This Product