AD30 Underground Mining Truck
The AD30 underground mining truck is designed for high production, low cost-per-ton hauling in smaller underground mining applications. Rugged construction and easy maintenance guarantee long life with low operating costs.
Engineered for performance, designed for comfort, built to last.
-
Engine
-
- Engine Model
- Cat® C15
- Gross Power - SAE J1995
- 409HP
- Gross Power - VR Engine - SAE J1995
- 409HP
- Gross Power - Tier 3 Engine - SAE J1995
- 409HP
- Bore
- 5.4in
- Stroke
- 6.8in
- Displacement
- 928in³
- Note (3)
- Engine derate will commence at an altitude of 2743 m (8,999 ft).
- Note (2)
- Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
- Gross Power - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995
- 409HP
- Rated Power
- 1800r/min
- Note (1)
- Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
- Note (4)
- Optional Ventilation Reduction package available.
- Note (5)
- Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
-
Operating Specifications
-
- Nominal Payload Capacity
- 66139lb
- Gross Machine Mass
- 132300lb
- Body Capacities
- 11.3-17.5 m³ (14.8-22.9 yd³)
-
Body Capacities
-
- Body 1
- 14.8yd³
- Body 2 - Standard Body
- 18.8yd³
- Body 3
- 22.9yd³
- Wide Body
- 21.9yd³
- Ejector Body (1)
- 19.9yd³
- Ejector Body (2)
- 21.9yd³
- Note
- Heaped SAE 2:1.
-
Weights
-
- Empty
- 63647lb
- Loaded
- 132277lb
- Empty - Rear Axle
- 20704lb
- Loaded - Rear Axle
- 73826lb
- Empty - Front Axle
- 42944lb
- Loaded - Front Axle
- 58451lb
-
Body Hoist
-
- Raise
- 10.5s
- Lower
- 11.2s
- Total Cycle Time
- 21.7s
-
Turning Dimensions
-
- Outside Clearance Radius
- 337.4in
- Inner Clearance Radius
- 198in
- Articulation Angle
- 42.5°
- Frame Oscillation
- 10 Degrees
-
Transmission
-
- Forward - 1
- 3.9mile/h
- Forward - 2
- 7mile/h
- Forward - 3
- 12.9mile/h
- Forward - 4
- 22.8mile/h
- Reverse - 1
- 4.4mile/h
- Note
- Maximum travel speeds with standard 26.5 × R25 tires.
-
Service Refill Capacities
-
- Engine Crankcase - With Filter
- 9gal (US)
- Transmission
- 18gal (US)
- Hydraulic Tank
- 38gal (US)
- Cooling System
- 20gal (US)
- Front Differential and Final Drives
- 15gal (US)
- Rear Differential and Final Drives
- 15gal (US)
- Fuel Tank
- 108gal (US)
-
Tires
-
- Tire Size
- 26.5 × R25 VSNT
-
Final Drives
-
- Differential Ratio
- 3.38:1
- Final Drive Ratio
- 4.76:1
- Total Reduction Ratio
- 16.13:1
- Note
- Fully floating axles.
-
Weight Distribution
-
- Empty - Rear Axle
- 32.50%
- Loaded - Front Axle
- 44.20%
- Loaded - Rear Axle
- 55.80%
- Empty - Front Axle
- 67.50%
-
Standards
-
- Standards
- ROPS/FOPS Certified Cab
Standard Equipment:
-
Electrical
-
- 12V power supply in cab
- Alternator, 95-amp
- Auxiliary start receptacle
- Battery disconnect switch, ground level
- Circuit breaker, 80-amp
- Corrosive protection spray
- Diagnostic connector
- Electric starting, 24V
- Engine shutdown switch, ground level
– Front left hand side - Lighting
– Brake and tail light, LED
– Headlights with dimmer switch, halogen
– Rear work light (cab mounted), halogen
– Reversing lights, halogen - Low maintenance batteries
- Reversing alarm
- Starting and charging system
-
Operator Environment
-
- Cat Electronic Monitoring System (Cat EMS)
- Electric horns
- Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer - Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal - Low hydraulic level warning
- Open operator station ROPS/FOPS structure
- Operator presence system (auto park brake)
- Rearview mirrors
- Suspension seat Cat Comfort TLV2 with retractable seat belt
- Trainer/passenger seat and seat belt
- Tilt/telescopic steering wheel
-
Power Train
-
- Cat C15 ATAAC diesel engine, 6-cylinder
- Automatic brake retarder control
- Auto shift transmission 4 speed forward/1 speed reverse
- Axle, arrangement standard width, front – rear
- Control throttle shifting
- Engine air intake precleaner
- Electric fuel priming pump
- Exhaust, turbo compartment shielding
- Four wheel drive
- Long life coolant
- Programmable ground speed limiting
- Programmable gear block out with tray up
- Radiator cap manual release
- Radiator, cross flow
- Rims, 5-piece, tubeless
- SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled
- Torque converter with automatic lockup
-
Other Standard Equipment
-
- Body, dump, (14.4 m³/18.8 yd³)
- Catalytic exhaust purifier/muffler group
- Centralized lubrication points
- Decals, international picto graphics
- Engine and transmission belly guards
- Fenders, standard with, front, rear flaps
- Fire wall
- Fuel system manual shut off tap
- Frame lifting lugs
- Front and rear tow pin
- Hand hold (access on/off top deck)
- Hitch, articulated and oscillated
- Operation and Maintenance Manual – English and other applicable local languages to select
- S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil - Swing out radiator grill
- Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
Optional Equipment:
-
Optional Equipment
-
- Axle, arrangement wide body, front – rear
- Battery shutdown
– Ground level isolation, in cab isolation switch
– Ground level isolation, engine shutdown switch
– Ground level isolation, in cab isolation, engine shutdown switch - Body dump
– Body, (11.3 m³/14.8 yd³)
– Body, (16.8 m³/21.9 yd³) wide body configuration
– Body, (17.5 m³/22.9 yd³) - Body ejector
– Ejector, (15.2 m³/19.9 yd³)
– Ejector, (16.8 m³/21.9 yd³) - Body liners, impact and wear
– 10 mm (0.4"), body, dump (11.3 m³/14.8 yd³)
– 10 mm (0.4"), body, dump (14.4 m³/18.8 yd³)
– 10 mm (0.4"), dump (16.8 m³/21.9 yd³) for wide body configuration
– 10 mm (0.4"), body, dump (17.5 m³/22.9 yd³) - Brake pressure gauges
- Camera, color rear facing
- Cover, anti vandalism for shipping
- Engine options
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)- DPF (Flow Through) Filter
- Fast fill system
– Coolant
– Engine oil
– Fuel (single tank)
– Hydraulic oil
– Transmission oil - Fenders, wide body, front, rear flaps
- Fire suppression system
– Ansul, dry powder
– Foam, water based - Fluids
– Arctic fuel
– Arctic coolant - Lighting
– Headlights with dimmer switch, LED
– Rear work light (cab mounted), LED
– Reversing lights, LED - Lubrication system
– Automatic, dump or ejector body
– Centralized, ejector body - Mine transfer
– Mine transfer ready front frame (tack welded)
– Mine transfer ready dump body (tack welded)
– Mine transfer ready ejector body (tack welded) - Operators station ROPS/FOPS enclosed
– Air conditioning
– Cab pressurizer and filter
– Dome light
– Heater
– Radio ready compartment for radio and speakers
– Sun visor
– Window, sliding cab door - Park brake switch engagement
– Push to apply
– Pull to apply - Payload
– Truck Payload Measurement System (TPMS)
– Remote display for TPMS - Reflective tape
- Rims
– Rim identification numbering
– Spare, tubeless - Seat
– Suspension seat Cat Comfort TLV2, vinyl
– Suspension seat tee, mechanical - Seat cover
– Tee and Cat Comfort TLV2
– Seat cover, companion - Secondary steering system
- Service tools
– Collet jacking bolts, dump and ejector
– Diagnostics box
– Hoist cylinder supports (for body removal)
– Brake wear gauge
– Reference parts manual for additional tooling available - Switches
– Engine shutdown, fire suppression activation
– Idle timer
– Engine shutdown, fire suppression activation/idle timer - Technology
– Vital Information Management System (VIMS) Gen 3 - Tire arrangements
– Tire, 26.5 × 25 VSNT Bridgestone
– Tire, 26.5 × 25 VSDL Bridgestone - NOTE: Not all features are available in all regions. See your Cat dealer for more information.