986 Wheel Loader
Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
Engine Power - ISO 14396:2002
449hp
Engine Model
Cat® C15
Peak Power Speed
1600
Gross Power - SAE J1995:2014
456hp
Net Power - SAE J1349:2011
373hp
Rated Speed
2000
Rated Speed - 2,000 rpm - EEC 80/1269
373hp
Rated Speed - 2,000 rpm - ISO 9249
373hp
Bore
5.4in
Stroke
6.75in
Displacement
927in²
Peak Torque (1,200 rpm) - SAE J1995:2014
1778lb/ft
Torque Rise
16%
Note (1)
Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Operating Weight - Standard
97785lb
Bucket Capacity Range
5.0-10.3 m³ (6.5-13.5 yd³)
Operating Weight - High Lift
104005lb
Rated Payload - Standard (Quarry Face)
11ton (US)
Rated Payload - Loose Material (Standard)
14ton (US)
Rated Payload - High Lift (Quarry Face)
11ton (US)
Rated Payload - Loose Material (High Lift)
12.1ton (US)
Cat Truck Match - Standard
770/735/740/745
Cat Truck Match - High Lift
772/773
Transmission Type
Cat planetary power shift
Forward - 1
5mile/h
Forward - 2
8mile/h
Direct Drive - Forward 2
8mile/h
Direct Drive - Forward 3
14mile/h
Direct Drive - Forward 4
24mile/h
Reverse - 1
5mile/h
Reverse - 2
8mile/h
Direct Drive - Reverse 2
9mile/h
Direct Drive - Reverse 3
16mile/h
Direct Drive - Reverse 4
25.4mile/h
Lift/Tilt System - Circuit
Load Sense
Lift/Tilt System - Pump
2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm
123gpm
Relief Valve Setting - Lift/Tilt
4050psi
Lift Cylinder - Bore
7.5in
Lift Cylinder - Stroke
45in
Tilt Cylinder - Bore
6.7in
Tilt Cylinder - Stroke
28.4in
Rack Back
4.5s
Raise
9s
Dump
3.5s
Lower
5.2s
Lower Float Down
4.3s
Total Hydraulic Cycle Time
21.3s
Steering System - Circuit
Load Sense
Steering System - Pump
Piston, variable displacement
Maximum Flow at 1,400 rpm
52gpm
Steering Cut Off Pressure
4000psi
Total Steering Angle
70°
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Front
Fixed
Rear
Trunnion
Oscillation Angle
±12.5°
Oscillation Angle - Chain Arrangement
±8.5°
Brakes
ISO 3450:2011
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Fuel Tank
141gal (US)
Fuel Tank - Short Lift
127gal (US)
Cooling Systems
26gal (US)
Crankcase
9gal (US)
Diesel Exhaust Fluid Tank
6gal (US)
Transmission
20gal (US)
Axle Oil - Differentials and Final Drives - Front
49gal (US)
Axle Oil - Differentials and Final Drives - Rear
45gal (US)
Hydraulic System Factory Fill
87gal (US)
Hydraulic System - Tank Only
34gal (US)
Operator Sound Pressure Level (ISO 6396:2008)
73dB(A)
Machine Sound Power Level (ISO 6395:2008)
113dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level (ISO 6396:2008)
74dB(A)
Machine Sound Power Level (ISO 6395:2008)
113dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
73dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Ground to Top of ROPS
13.5ft
Ground to Top of Exhaust Stacks
13.3ft
Ground to Top of Hood
10.7ft
Ground to Center of Front Axle
3.2ft
Ground to Fuel Tank Clearance
2.3ft
Ground to Lower Hitch Clearance
1.5ft
Reach - Maximum Lift
7.1ft
Clearance at Maximum Lift
10.1ft
B-Pin Height - Maximum Lift
16.1ft
Maximum Overall Height - Bucket Raised
22.4ft
Rear Axle - Centerline to Bumper
10.3ft
Wheel Base
12.5ft
Maximum Overall Length
36.6ft
Front Axle Centerline to Bucket Tip
13.8ft
Note
- All dimensions are approximate.
- Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Ground to Top of ROPS
13.5ft
Ground to Top of Exhaust Stacks
13.3ft
Ground to Top of Hood
10.7ft
Ground to Center of Front Axle
3.2ft
Ground to Fuel Tank Clearance
2.3ft
Ground to Lower Hitch Clearance
1.5ft
Reach - Maximum Lift
7.4ft
Clearance at Maximum Lift
11.6ft
B-Pin Height - Maximum Lift
17.6ft
Maximum Overall Height - Bucket Raised
23.9ft
Rear Axle - Centerline to Bumper
10.3ft
Wheel Base
12.5ft
Maximum Overall Length
38ft
Front Axle Centerline to Bucket Tip
15.3ft
Note
- All dimensions are approximate.
- Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Ground to Top of ROPS
13.5ft
Ground to Top of Exhaust Stacks
13.3ft
Ground to Top of Hood
10.7ft
Ground to Center of Rear Axle
3.2ft
Ground to Fuel Tank Clearance
2.3ft
Ground to Lower Hitch Clearance
1.5ft
Reach at Maximum Lift
8ft
Clearance at Maximum Lift
10.7ft
B-Pin Height at Maximum Lift
15ft
Maximum Overall Height, Bucket Raised
20.9ft
Rear Axle Center Line to Bumper
10.3ft
Wheel Base
12.5ft
Maximum Overall Length
35ft
Front Axle Centerline to Bucket Tip
12.2ft
Ground to Top of ROPS
13.5ft
Ground to Top of Exhaust Stacks
13.3ft
Ground to Top of Hood
10.7ft
Ground to Center of Rear Axle
3.2ft
Ground to Fuel Tank Clearance
2.3ft
Ground to Lower Hitch Clearance
1.5ft
B-Pin Height at Maximum Lift
15ft
Rear Axle Center Line to Bumper
10.3ft
Wheel Base
12.5ft
Maximum Overall Length
35.4ft
Front Axle Centerline to Bucket Tip
12.6ft
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Powertrain
-
- –50° C (–58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine block heater 120V or 240V
- High ambient cooling – software
-
- Miscellaneous Attachments
-
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- Cold Weather Starting (extra two batteries)
-
- Other Optional Configurations
-
- Aggregate Handler
- Block Handler
-
- Operator Environment
-
- Cat® Detect, object detection system
- Cat Production Measurement
- AM/FM/CD/MP3 radio
- Satellite Sirius radio with Bluetooth
- LED warning strobe
- CB radio ready
- Window pull down visor
- Handrail mounted mirrors
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Electrical
-
- Alarm, back-up
- Alternator, single 145 amp
- Batteries, maintenance-free
- Converter, 10/15 amp, 24V to 12V
- Lighting system (LED, work lights, access and service platform lighting)
- Starting and charging system, 24V
- Auxiliary jump start receptacle
-
- Operator Environment
-
- Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Cat Vision, rear vision camera system
- Cat Production Measurement ready
- Cab precleaner
- Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
- Controls, lift and tilt function
- Heater, defroster
- Horn, electric
- Instrumentation, gauges:
– Coolant temperature
– Fuel level
– DEF level
– Hydraulic oil temperature
– Powertrain oil temperature - Light, cab, dome
- Lunchbox, beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat belt minder
- Seat belt, retractable, 76 mm (3 in) wide
- Steering and Transmission Integrated Control (STIC™) System
- UV glass
- Transmission gear indicator
- Wet-Arm wipers/washers (front and rear):
– Intermittent front and rear wipers - Lights, directional
-
- Powertrain
-
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain screens
- Crankcase guard
- Electro hydraulic parking brake
- Engine, C15 MEUI diesel, turbocharged/aftercooled
- Ground level engine shutdown switch
- Turbine precleaner, engine air intake
- Starting aid, ether, automatic
- Torque converter, Neutralizer
- Transmission, planetary powershift, 4F/3R electronic control
- Manual switch and automatic fuel priming
-
- Other
-
- Automatic bucket lift kickout/positioner
- Hydraulically driven demand fan
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Ecology drains for engine, radiator, hydraulic tank
- Fuel tank, 535 L (141 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, steering and brake filtration/screening system
- Cat® Clean Emission Module
- Oil sampling valves
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
