844 Wheel Dozer

PDF Print

Maximize productivity in mining applications with the Cat® 844 Wheel Dozer, designed with efficiency in mind. Enhanced maintenance capabilities and simplified serviceability make for a long lifecycle, low owning and operating costs, and more uptime. Move more material with a machine built for the toughest conditions.

View Rental Set Up an Account

Engine Model

Cat® C27

Net Power - SAE J1349:2011 - Standard Ambient

732hp

Rated Speed

1800r/min

Emissions

Option 1 - U.S. EPA Tier 4 Final / EU Stage V

Engine Power - ISO 14396:2002

786hp

Gross Power - SAE J1995:2014

801hp

Net Power - SAE J1349:2011 - High Ambient

681hp

Emissions

Option 2 - China Nonroad Stage III emissions standards, equivalent to U.S. EPA Tier 2

Engine Power - ISO 14396: 2002

752hp

Gross Power - SAE J1995:2014

766hp

Net Power - SAE J1349:2011 - Standard Ambient

699hp

Net Power - SAE J1349:2011 - High Ambient

648hp

Bore

5.4in

Stroke

6in

Displacement

1649.5in³

Peak Torque - Speed

2624lb/ft

Torque Rise

18%

Note

Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.

Transmission Type

Cat Planetary Power Shift

Converter Drive - Forward 1

4.5mile/h

Converter Drive - Forward 2

8.3mile/h

Converter Drive - Forward 3

14.2mile/h

Converter Drive - Reverse 1

4.9mile/h

Converter Drive - Reverse 2

9.1mile/h

Converter Drive - Reverse 3

15.5mile/h

Direct Drive - Forward 1

Lock-up disabled

Direct Drive - Forward 2

8.5mile/h

Direct Drive - Forward 3

15.2mile/h

Direct Drive - Reverse 1

5.4mile/h

Direct Drive - Reverse 2

9.6mile/h

Direct Drive - Reverse 3

16.4mile/h

Note

Travel speeds based on 45/65-45 L-5 46 ply tires.

Output at 2,000 rpm and 6900 kPa (1,000 psi)

82gal/min

Cylinders, Double Acting - Lift, Bore and Stroke

133 mm × 1535 mm (5.25 in × 60.4 in)

Cylinder, Double Acting - Tilt and Tip, Bore and Stroke

210 mm × 188 mm (8.25 in × 7.4 in)

Relief Valve Setting - Bulldozer (Large Pump)

2700psi

Relief Valve Setting - Tilt Cylinders (Small Pump)

2920psi

Steering System - Circuit

Pilot, load sensing

Steering System - Pump

Piston, variable displacement

Minimum Turning Radius - Over Blade

34ft

Total Steering Angle

35°

Maximum Flow

94.3gal/min

Relief Valve Setting

4500psi

Fuel Tank - Standard

286.6gal (US)

Cooling System

54.9gal (US)

Crankcase

20gal (US)

Transmission

29.1gal (US)

Differential - Final Drives - Front

71.6gal (US)

Differential - Final Drives - Rear

68.9gal (US)

Hydraulic System - Implement and Hydraulic Fan

68.9gal (US)

Hydraulic System - Steering and Braking

34.9gal (US)

Operator Sound Pressure Level (ISO 6396:2008)

72dB(A)

Machine Sound Power Level (ISO 6395:2008)

116dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*

72dB(A)

Machine Sound Power Level (ISO 6395:2008)*

114dB(A)

Note (1)

*Sound suppression equipped

Note (2)

The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (3)

The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (4)

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Operator Sound Pressure Level (ISO 6396:2008)

72dB(A)

Machine Sound Power Level (ISO 6395:2008)

116dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*

72dB(A)

Machine Sound Power Level (ISO 6395:2008)*

114dB(A)

Note (1)

*Sound suppression equipped

Note (2)

The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (3)

The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (4)

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Height - Top of ROPS

17.2ft

Height - Top of Exhaust Pipe

16.6ft

Height - Top of Hood

12.7ft

Ground Clearance

2ft

Centerline of Front Axle to Hitch

7.5ft

Centerline of Rear Axle to Edge of Bumper

12.5ft

Wheel Base

15.1ft

Length - With Blade on Ground

36.5ft

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Electrical And Lighting
- Lights, LED
- Product Link (Cellular)
- Product Link (Satellite)
Powertrain
- Engine brake
- No-spin rear axle
- No-spin rear axle and oil cooler
- Precleaner, raised
Operator Environment
- Radio, Sirius XM/AM/FM radio with Bluetooth technology, USB port, 3.5 mm AUX input
- Rubber mounted cab glass
- Window sun screen
Safety
- LED warning strobe
Service
- Product Link^™
Blades
- HD Semi-U - 16.1 m3 (21.1 yd3)
- Paint, black blade rear
Cooling
- High ambient cooling - software (recommended for site conditions that do not exceed 49°C [121°F]
Cold Weather
- 50° C (-58° F) antifreeze
- 120V or 240V coolant heating elements (recommended in conditions from -18°C to -30°C [0°F to -22°F]
- -40°C (-40°F) Hydraulic Oil, Arctic
Tramming
- Fender extensions, roading, front and rear

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Electrical And Lighting
- Alternator, 150 amp
- Batteries, maintenance free (4 - 1,400 CCA)
- Battery disconnect and jump start receptacle, bumper
- Deutsch terminal connectors
- Electrical system, 24V
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
- Starter lockout in bumper
- Starting and charging system, 24V
- Transmission lockout in bumper
Powertrain
- Brakes, oil cooled, multi-disc, service/secondary
- Driveline parking brake
- Engine Cat C27
- Fuel priming pump (electric)
- Ground level engine shutdown switch
- Precleaner, engine air intake (above hood)
- Radiator, Aluminum Modular (AMR)
- Starting aid, (ether) automatic
- Throttle Lock electronic
- Torque Converter, Impeller clutch with lock-up clutch (ICTC) and rimpull control system
- Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
Operator Environment
- Advisor display, displays real time operating information, performs calibrations and customizes operator setting
- Air conditioner and heater with automatic temperature control
- Air precleaner, powered
- Cab, sound-suppressed pressurized, separate external rolloever protective structure/falling objects protective structure (ROPS/FOPS)
- Cigar lighter and ashtray
- Coat hook
- Converter (12V, 10/15 amp) and power port
- Electro-hydraulic blade controls (joystick)
- Heater and defroster
- Horn, electric
- Instrumentation, gauges: - engine coolant temperature, fuel level, hydraulic oil temperature, powertrain oil temperature, tachometer
- Instrumentation, warning indicators: - Action alert system, three category - Automatic transmission model enable status - Brake malfunction - Bucket float status - Delayed engine shutdown status - Engine idle shutdown status - Engine malfunction - Fuel economy mode enable status - Hydraulic lockout - Lockup clutch enable status - Low fuel level - Parking brake status - Rimpull control enable status - Seatbelt warning - Secondary steering (if equipped) - Throttle lock status - Transmission gear
- Light, dome (cab)
- Lunchbox and beverage holders
- Seat, premium with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
- Radio, AM/FM with Bluetooth^®, USB Port, 3.5 mm AUX input
- Tinted glass
- Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
Safety
- Alarm, back-up
- Camera, rear vision
- Emergency platform exit
- Implement lockout switch
- Mirrors, rearview (externally mounted)
- Seat belt, retractable, 76 mm (3 in) wide
- Stairway, left and right rear access
- Steering and transmission lock lever, cab
- Steering, secondary
- Seat, trainer with lap belt, 76 mm (3in) wide
- Toe kicks
Service
- Axle ecology drains
- Case drain filters
- Coupling, Caterpillar O-ring face seals
- Engine, crankcase, 500 hour interval with CH4
- Front walkway around cab
- Guards, crankcase and powertrain
- Grouped/labeled lube points
- Battery disconnect and jump start receptacle, bumper
- Hitch, drawbar with pin
- Hoses, Cat XT^™
- Oil sampling valves
- Sight guages for steering, implement and transmission oil
- Vital Information Management System (VIMS) 3G with graphical information display: external data port, customizable operator profiles
Cooling
- Standard ambient package (recommended for site conditions that do not exceed 43°C (110°F)
Cold Weather
- Heated seat
Efficiency
- Economy mode with on demand throttle
- Positive flow control hydraulic system
- Impeller Clutch Torque Converter (ICTC) with lock-up clutch
- Steering, load sensing
- Soft detent controls
- Engine idle management features: - Auto idle kickdown - Delayed engine shutdown - Engine idle shutdown
Tramming
- Front fenders

844 Wheel Dozer

844 Wheel Dozer

D6 Dozer

D5 Dozer

D4 Dozer

Sign Up For Our Emails

Request a Quote

Share This Product