D11 Dozer
D11 Dozer
The Cat ® D11 Dozer delivers higher productivity at lower cost — for a reduction of up to 6% in overall cost per bank cubic meter compared to the previous model. Infused with performance-enhancing features, the D11 helps you improve the efficiency of your dozing operation. The torque divider with stator clutch automatically frees up the stator when torque is not required, delivering higher drivetrain efficiency for reduced fuel consumption. High-horsepower reverse speeds up non-productive traveling to reduce cycle time, while load-sensing hydraulics deliver more power to the dozer, increasing responsiveness and boosting fuel efficiency. Advanced technologies are completely integrated into the dozer, creating smart machines and more informed operators to maximize the productivity of your operation.
Engine Model
Cat® C32
Engine Power - Net SAE J1349/ISO 9249 - Forward
850hp
Displacement
1959in³
Engine Power - Net SAE J1349/ISO 9249 - Reverse
955hp
Note (1)
*Excludes all fan losses.
Note (2)
Engine ratings apply at 1,800 rpm.
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Operating Weight
235507lb
Operating Weight - Carrydozer
250665lb
Note (1)
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Note (2)
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
Semi-Universal (SU)* Capacity
35.6yd³
Semi-Universal (SU)* Width Over Endbits
219.8in
U-Blade Capacity
45yd³
U-Blade Width
249.6in
Reclamation Universal - Blade capacity (SAE J1265)
55yd³
Reclamation Universal - Width with blade (over end bits)
251.8in
Carry Dozer - Blade capacity (SAE J1265)
57yd³
Carry Dozer - Width with blade (over end bits)
263.9in
Engine Model
Cat® C32
Displacement
1959in³
Engine Power - Net SAE J1349/ISO 9249 - Forward
850hp
Engine Power - Net SAE J1349/ISO 9249 - Reverse
957hp
Note (1)
*Excludes all fan losses.
Note (2)
Engine ratings apply at 1,800 rpm.
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Fuel Tank - Total Volume
500gal (US)
Fuel Tank - Usable Volume
475gal (US)
Pump Type
Variable displacement piston pump
Combined Pump Output - Implement
177gpm
Shoe Type
Extreme Service
Width - Shoe
28in
Width - Shoe - CD
36in
Shoes/Side
41
Grouser Height
4in
Pitch
12.5in
Ground Clearance*
30.6in
Track Gauge
114in
Length - Track on Ground
175in
Ground Contact Area
9781in²
Ground Contact Area - CD
12605in²
Track Rollers/Side
8
Number of Carrier Rollers
1 per side (optional)
1.0 Forward
2.5mile/h
2.0 Forward
4.4mile/h
3.0 Forward
7.6mile/h
1.0 Reverse
3mile/h
2.0 Reverse
5.3mile/h
3.0 Reverse
9.1mile/h
Drawbar Pull - 3 Forward
46250ft·lbf
Drawbar Pull - 1 Forward
148200ft·lbf
Drawbar Pull - 2 Forward
82300ft·lbf
Maximum penetration force * (shank vertical)
66000lb
Maximum penetration depth (standard tip)
63.5in
Pryout Force
148510lb
Maximum penetration force * (shank vertical)
66110lb
Maximum penetration depth (standard tip)
85.5in
Pryout Force
148510lb
Overall Beam Width
131.1in
Maximum Penetration Force - Shank Vertical
77350lb
Maximum Penetration - Standard Tip
43.3in
Pry-Out Force - Multi-Shank Ripper with One Tooth
145640lb
Width at Outside of Track (710 mm Track Shoe)
149.8in
Length with SU-Blade** - No rear attachment
345.1in
Overall Length SU-Blade and SS Ripper**
421.7in
Cooling System
46.8gal (US)
Cooling System Refill - Tier 2 Equivalent Engine
41.7gal (US)
Engine Crankcase
35.1gal (US)
Power Train
120gal (US)
Power Train - Refill Volume
103.3gal (US)
Final Drive - Each
12.4gal (US)
Roller Frames - Each
24.8gal (US)
Hydraulic Tank
42.2gal (US)
Hydraulic System Tank and Chassis
64.7gal (US)
Hydraulic System Chassis + Blade and Ripper (Standard)
117.6gal (US)
Hydraulic System Chassis + Blade and Ripper (Carrydozer)
143.4gal (US)
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
Sound (1)
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
Sound (2)
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).
Ground Clearance*
31.4in
Track Gauge
114in
Width at Outside of Track (710 mm Track Shoe)
142in
Height (ROPS/canopy)*
185.9in
Length of Track on Ground
175in
Length with SU-Blade** - No rear attachment
337.8in
Overall Length SU-Blade and SS Ripper**
414.4in
Note
*Includes grouser height for total dimensions on hard surfaces.
Note (1)
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)
-
- Operator Environment
-
- MineStar™ Terrain Display
- Visibility – Dual Camera
- Visibility – Four Cameras, 360 Degree View
- Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
- Cab Glass – Dual-Pane Laminated Impact Safety
- Cab Glass – High-Pressure Safety (40 psi/275 kPa)
- Cab Access – Powered Ladder
-
- Cat Technology Products
-
- AutoCarry™
- Auto Ripper Control
- Cat Terrain with 3D Blade Control
- Cat Terrain Ready
- Cat Product Link Elite Dual Mode (cellular + satellite)
- Cat Command for Dozing Ready
-
- Cat Power Train
-
- Hydraulic Cooling Fan – Automatic Reversing
-
- Undercarriage
-
- Track Shoes (ES): 810/915 mm (32/36 in) Width (various configurations)
- Track Links – High Abrasion – Tall Link
- Track Links – Heavy Duty XL – Duralink
- Track Shoe – Abrasion Resistant
- Track Shoe – Anti-Packing Round Hole
- Abrasion Rollers and Idlers
- Cold Weather Rollers and Idlers
- Sound Suppression Undercarriage
- Carrier Roller
-
- Hydraulics
-
- Carrydozer Hydraulics
- Dozer Extended Blade Pitch
- Ripper Pin Puller
-
- Electrical
-
- Battery Isolation – Dual Pole
- Lights – LED – Premium Package
-
- Service And Maintenance
-
- Sound Reduction Sealed Bottom Guards
- Ground-Level Fluid Fill and Drain
- Ripper Lubrication – Autolube with Ground-Level Fill
- Ripper Lubrication – Grouped – Ground-Level Fill
-
- Rear Attachments
-
- Ripper – Single Shank with Pin Puller
- Ripper – Single Shank Pushblock with Pin Puller
- Ripper – Single Shank with Pin Puller – Heavy
- Ripper – Multi Shank (three shank)
- Ripper – Multi Shank – Heavy (three shank)
- Ripper – Multi Shank Leach Pad with Pin Puller
- Ripper – Multi Shank – Coal (five shank)
- Counterweight – Rear
- Drawbar with Counterweight
-
- Blades
-
- Semi-Universal (27.2 m³/35.6 yd³)
- Universal (34.4 m³/45.0 yd³)
- Carrydozer (43.6 m³/57 yd³)
- Reclamation Universal (42 m³/55 yd³)
- Reclamation Universal (53.5 m³/70 yd³)
- Coal Universal (75 m³/98.0 yd³)
- Coal Universal (65 m³/85.5 yd³)
-
- Other
-
- Fire Suppression Ready
- Fire Suppression Installed
-
- Operator Environment
-
- ROPS/FOPS, Sound-Suppressed Cab
- High-Definition Primary Touchscreen Display
- Visibility – Rearview Mirrors
- Air Conditioner and Heater with Automatic Climate Control
- Seat – Cloth with Air suspension
- Cab Glass – Single-Pane Tinted Safety
- Cab Access – Blade Push Arm Steps and Grab Handle
-
- Cat Technology Products
-
- VIMS
- Automated Blade Assist (ABA)
- Cat Product Link™ Elite (cellular)
-
- Cat Power Train
-
- Cat C32 Engine – U.S. EPA Tier 4 Final or Tier 2 Equivalent
- High-Performance Single-Plane Cooling Module
- Stator Clutch Torque Divider – Electronic Control
- Powershift Transmission – Three-Speed Electronic Shift
-
- Undercarriage
-
- Suspension Type Undercarriage
- Sleeve Bearing Track
- Lifetime-Lubricated Rollers and Idlers
- Track Shoe (ES): 710 mm (28 in) Width
-
- Hydraulics
-
- Electronically Controlled, Load-Sensing Dozer Lift and Tilt
- Electronically Controlled, Load-Sensing Ripper Lift and Pitch
- Dozer Blade – Dual Tilt
- Electronically Enabled Blade – Quick Drop
-
- Electrical
-
- 24V Electric Start, Dual Starters
- Batteries – 4 × 4,200-Amp Hour, 12V
- Battery Isolation
- Lights – Halogen – 13 Positions
-
- Service And Maintenance
-
- Ecology Fluid Drains – All Compartments
- Hinged Bottom Guards
- High-Speed Oil Change – Engine and Transmission
- Ground-Level Fast Fuel Fill
- Ground-Level Electrical Service Station
- S·O·SSM Fluid Sampling Ports
- Diagnostic Connector
